Archive for How to identify which Valve you need

SMR is stamped on valve

SMR is stamped on valve and usually a date stamp e.g 01/2013 although some earlier models used number codes as well (Please note that earlier Valves have San Marco stamped on them but whether SMR or San Marco, the same valves apply). These numbers / dates is not sufficient to identify which SMR valve you […]

Continue Reading →

Posted in: Helpful Tips, How to identify which Valve you need, How to....

Leave a Comment (8) →

Spare Parts for Perlator Tap

Spare Parts for Perlator Tap We get frequent queries regarding fixing a Perlator Tap but ‘Perlator’ is just the brand name of the Aerator at the tip of the Spout.  It is not the actual name of the Tap Brand or the Tap. Fortunately we stock most of the UK Leading Tap Brand Spare Parts and […]

Continue Reading →

Posted in: Helpful Tips, How to identify which Valve you need

Leave a Comment (2) →

My Neoperl Tap is dripping

My Neoperl Tap is dripping Neoperl is just the brand name of the Aerator at the tip of the Spout.  It is not the actual name of the Tap Brand or the Tap. Fortunately we stock most of the UK Leading Tap Brand Spare Parts and once we have the correct information as outlined in the […]

Continue Reading →

Posted in: Helpful Tips, How to identify which Valve you need

Leave a Comment (4) →

My Kitchen Tap is dripping….

Usually your Kitchen Tap is dripping from either (1) the spout or (2) where the spout meets the base. If it is dripping from the Spout then it is most likely that you need to change the valves (one or both) and / or the brass bush ring (but usually its just the valve) hot […]

Continue Reading →

Posted in: Helpful Tips, How to identify which Valve you need, How to...., Plumbing Guides

Leave a Comment (4) →

My Franke Triflow Kubus Tap is dripping

If your Franke Triflow Kubus Tap is dripping from the Spout then you need to replace the valves. Your Franke Triflow Kubus Tap or Franke Filterflow Kubus Tap takes 3 valves (1 hot and 2 cold).  The Triflow version was discontinued Spring 2011 and replaced by the Filterflow version.  They have different parts. If your […]

Continue Reading →

Posted in: Franke Tap Spare Parts Guides, Helpful Tips, How to identify which Valve you need

Leave a Comment (10) →
Page 1 of 2 12