My Franke Tap leaking at base

1296R O Ring Kit

O Ring Kit

If your Franke Tap leaking at base then you probably need to replace the O Rings.

Different Franke Taps take different O Rings.

If you go to our Franke Spare Parts Section here and select your Franke Tap (based on the pictures) and click on the link this will bring you to the O Ring Kit that is suitable for your Franke Kitchen Tap.

 

If your Franke Tap is dripping from the spout, then changing the valves should solve this problem. If you go to our Franke Spare Parts Section here and select your Franke Tap (based on the pictures) and click on the link this will bring you to the Valve that is suitable for your Franke Kitchen Tap.

 

Posted in: Franke Tap Spare Parts Guides, Helpful Tips, Plumbing Guides

Leave a Comment (8) ↓

8 Comments

  1. Richard February 8, 2018

    I wish to remove my franke filterflow from the kitchen sink. underneath the sink there is
    no screw or nut to undo. how do I proceed.

    • Alice February 8, 2018

      As there are several different Franke Filterflow Taps (and Triflow versions as well) the quickest way for you to solve this is to google for these installation guides, then download the one that is your own particular model and that will contain all the information that you require.

  2. Gordy March 23, 2017

    Hi There I have the mythos tap in kitchen it’s dropping and replace o ring middle but leak looks like it’s coming from hot water side. Problem is when I try to take it of whole brush is turning and now nut is sheared what should I do?

    • Alice March 23, 2017

      Dear Gordy, If I understand you correctly, your tap is dripping from the hot water side ? But I am not sure if this is dripping from the spout (which usually would point to replacing the Hot Mythos Valve) or if dripping where the Spout meets the base, that would indicate replacing the O Ring Kit. Perhaps you haven’t fitted the new O Ring Kit correctly ? ie. lined up the new O Rings correctly as per the blog? if the grub screw is now sheared then you just need to replace the grub screw.

  3. William Turner September 29, 2016

    How do I remove a Franke Danube spout? I’ve loosened off the colour and moved it out of the way. The spout pulls up to reveal the o-rings and no more. Can’t see a grub screw and can’t feel a notch, even after a 360 degree rotation.

  4. alistair September 24, 2015

    My tap is leaking at the cold side lever, not the spout. What do I need to replace and how do I know exactly which Olympus tap it is?

    • Alice September 24, 2015

      Hi Alastair

      In answer to your first question regarding the leak from the Handle and possible causes ?:
      Here is a blog link to the most common problems with UK Kitchen Taps and solutions: Kitchen Taps Trouble Shooting Guide
      Most likely you need to replace the Valve or the Brass Bush or both.

      How do I know exactly which Olympus Tap it is ? Take a look at this blog here : My Franke Olympus Tap is dripping and this gives the measurements of the Valve for the Olympus Tap that we stock and links then to our Store if you wish to purchase the Valve and Brass Bush (if required).

      Also this link here to Franke Spare Parts details all the various Olympus Taps that we stock spare parts for as you didnt specify whether you have the Olympus, the Olympus Filterflow, the Olympus Triflow or the Olympus Spring but this link should help you there also.
      kind regards

      Alice
      Taps and Sinks Online Limited

Leave a Comment

You must be logged in to post a comment.