Lamona Victorian Tap4801 Parts

We stock extensive range of Howdens Kitchen Tap Spare Parts including Lamona Victorian Tap4801 parts, Tap4802 and Tap4822. If your Lamona Victorian Tap4801 is dripping from the Spout then it is most likely that you need to replace the Hot Valve, the Cold Valve or both. Also be careful when removing your Valve. If the Howdens Lamona Victorian Tap4801 Valve looks wider than expected then the Brass Bush that surrounds the Howdens Lamona Victorian Tap4801 Valve has also come out with your Valve. If you can’t separate your Howdens Lamona Victorian Tap4801 valve and bush then you will have to replace the bush as well as the Howdens Lamona Victorian Tap4801 Valve. Luckily we also stock the bush if required as we stock all the Howdens Lamona Victorian Tap4801 Parts. If the drip is intermittent from the spout then it could be something as simple as a little bit of debris is stuck behind the Aerator at the tip of your spout. Remove the Aerator and soak it in a descaler and then put it back into your spout again. Another tip to see which valve needs replacing is to turn on the hot water and let it run for a few minutes. If the drip remains Hot then it is most likely the Hot Valve that needs replacing. If the drip turns cold then it is most likely the Cold Valve that needs replacing. We have put DIY guides up on our website e.g 7 easy steps to remove your Kitchen Tap valve to assist you.