Taps And Sinks Online

Caple Washington Tap Valve



Caple Washington Tap Valve for the Cold Water side or Hot Water side of your Kitchen Tap if your Tap is dripping from the Spout.

The Valve parts listed here are not for the later Caple Washington Dual Control Tap&lt See below.
If your Washington Tap is dripping where the Spout meets the base then you might need to replace your Washington Tap O Ring Kit.
Brass Valve with ceramic discs.

See below for more technical information.



The Caple Washington Tap Valve

This is not the part for the Caple Washington Dual Control Tap. The Caple Washington Tap that we are listing valve parts here has a distinctive locking nut 1243R at the base of the spout and here below is a close up).

spout example 1243R locking nut 1239R o ring kit

Spout example 1243R Locking Nut and 1239R O Ring kit

1212R Quarter Turn Kitchen Tap Valve Valve Hot or Cold

The Hot Valve opens Clockwise.  The Cold Valve opens Anti-Clockwise.

Caple Washington Tap Valve Measurements: Height 50mm / Diameter at thread 21mm / Splines 20 / Nut Height 8mm

1212R Valve Blueprint

1212R Valve Blueprint



It can be a common enough problem that when you remove your Kitchen Tap Valve it looks different than the valve in the picture (or the Valve that you purchased from us). It is most likely because the brass bush is still attached.


Caple Washington Dual Control Tap , not SM

This Caple Washington Dual Control Tap takes different parts to the ‘Caple Washington Tap’

Detailed Shipping / Returns information can be found here.

In Brief: Small items only by Post: £2/£3 Courier Delivery DPD Track & Trace: £5

BREXIT: No additional charges on delivery once your Order before shipping charges is less than £135.

Troubleshooting Guide

Troubleshooting Guide


There are no reviews yet.

Be the first to review “Caple Washington Tap Valve”

This site uses Akismet to reduce spam. Learn how your comment data is processed.

You may also like…


Your Cart