Taps And Sinks Online

Carron Phoenix Alba Kitchen Tap Valve

£11£33 incl. VAT

If your Tap is dripping from the Spout then you might need to change your Valves.  Here is our Guide 7 Easy Steps to replace Kitchen Tap Valve. Also the blog post Kitchen Tap – How to remove the Valve Cover will help you remove the handle of the Alba Tap to get at the Valve. The bush, if required, is only on the hot side. There is no bush on the cold. 3409R link below.

 

Please note that whether you have the earlier two threaded 1427r (AKA 2307R, 2552R or 4276R) valve or the later one threaded 3547r, the manufacturer of your Tap has recommended that the 1427R two threaded valve be used as a replacement valve [this is due to a modification of the 3547R current valve]. The 1427R valve comes with a white seal underneath . This picture here shows you the difference between the 3547r and the 1427r(4276r). They may look different, but they are the same in the measurements that matter, and this is the valve recommended anyhow by the manufacturer of your Tap

SMR 3547R 4276R

SMR 3547R 4276R

 

If your Tap is dripping where the Spout meets the Base you might need to replace your Carron Phoenix Alba Tap O Ring Kit 1239R.

Here is the link to all our Carron Phoenix Alba Kitchen Tap Spare Parts.

Description

Carron Phoenix Alba Kitchen Tap Valve

Measurements 1427R – which has two sets of threads (one above and one below black O Ring)

  • Overall height: 53mm
  • Nut Height: 8mm
  • Diameter at thread: 21mm
  • Splines: 28
  • Height of Splines: 9mm
1427R Valve

1427R Valve (Cold Valve shown here)

Measurements 3547R (which has only one set of threads below the black O Ring)

  • Overall height: 53mm
  • Nut Height: 6mm
  • Diameter at thread: 21mm
  • Splines: 28
  • Height of Splines: 11mm
3547R-H (shown here Hot Valve)

3547R-H (shown here Hot Valve)

 

If your Tap is dripping where the Spout meets the Base you might need to replace your Carron Phoenix Alba Tap O Ring Kit 1239R.

Here is the link to all our Carron Phoenix Alba Kitchen Tap Spare Parts.

Remove valve covers:

The indicator on the Alba tap can be taken off using your finger nail.  Then use a flat headed screwdriver to remove the brass screw.  This will release the handle from the tap.  Then use an industrial spanner to remove the valve.  Put in the new valve and tighten with adjustable spanner.  Replace handle.  Screw back in brass screw and the indicator will pop back on.

Useful Tip Re Bush (Hot side only, no Bush on Cold side)

It can be a common enough problem that when you remove your  Hot Valve it looks different than the valve in the picture. It is most likely because the brass bush is still attached. There is only a Bush on the Hot valve. There is NO bush on the Cold side. The Bush code is 3409R

For tips on how to separate a Valve from a Brass Bush, see here.

If the Valve is stuck inside the Brass Bush then you will have to separate them OR buy a Brass Bush as well (see You May Also Like section below)

Alba Tap Valve 3547R inside Brass Bush 3409R

Alba Tap Valve 3547R inside Brass Bush 3409R

3561R valve and 3409R bush

1427R (4276R)) valve and 3409R bush

Detailed Shipping / Returns information can be found here.
In Brief:
- Small items only by Post: £3.50 Can take currently up 7-10 working days.
- Courier Delivery DPD Track & Trace: £5.50 Usually takes c. 2-3 working days.
- BREXIT: No additional charges on delivery once your Order before shipping charges is less than £135.

Troubleshooting Guide

Troubleshooting Guide

Reviews

There are no reviews yet.

Be the first to review “Carron Phoenix Alba Kitchen Tap Valve”

This site uses Akismet to reduce spam. Learn how your comment data is processed.

You may also like…

0

Your Cart