Description

Carron Phoenix Artesian Tap O Ring Kit 9.06401

This part can also be listed as the FR9400 O Ring Kit.

• Here is our Guide: How to replace your O Ring Kit.
• Please see our plumbing guides and DIY Videos here
• Here is a link to all our spare parts for the Carron Phoenix Artesian Kitchen tap.

Each O Ring Kit contains:

• PTFE Split O ring for older taps.
• Stainless Steel Grub Screw (Larger end for older models).
• PTFE Split O ring for newer taps.
• Stainless Steel Grub Screw (Smaller end for newer models).
• Large Rubber O ring (top ring on spout).
• Small Rubber O ring (bottom ring on spout).
• Allen Key (for removing and re-fitting the grub screw into the back of the body of the Carron Phoenix Artesian Tap).
• Pack of lubricating grease (for lubricating the O rings prior to re-assembly of the Spout).

Please Note: both older and newer versions of the grub screws and split O rings are included, you will need one type or the other NOT both.

After Sales Service

• Our Sales Team is available for excellent after sales service.
• We have been supplying Kitchen Taps for over 30 years and accordingly can troubleshoot any issue with a Kitchen Tap.
• The most effective way to maintain your Kitchen Tap is to fix any issue as it arises.
• If you ignore a drip it can effect the inner workings of your Tap.
• It might result in the drip being beyond repair.
• Often Plumbers advise to replace the Tap.  They do this because customers purchase the wrong part or the exact part is hard to source. If you contact us before buying, we will advise you on the correct part for your Tap. That way, if you are calling in a Plumber to fix your Tap, all the correct parts will be there for the Plumber to fix your Tap.

• We always recommend that you should check your own Spout before ordering a new set of O Rings.
• This is important because if your spout has a pinhole (see example below), replacing the O-ring kit won't resolve the issue.
• If you have a pinhole you will need to replace the entire Spout'
• Here is our Guide : How to remove Kitchen Tap Spout so that you can check for pinholes.
• If you think that you have a pinhole, and do not know what Spout you need, then contact us with details of your tap, such as a picture and any other information (e.g., brand markings), so we can send you a link to the correct spout.
• Here is the example of a pinhole in a Spout.
  

  Example Pinhole in Spout

Tip when changing the O Ring Kit :

• Usually, only the black O-rings need replacing unless one of the white O-rings is damaged.
• Some white O-rings have an intentional split for use in spouts with a grub screw, so a split does not indicate it is broken.
• Your new O-ring kit may include extra rings not needed for your spout, as some kits were later updated with a smaller ring for added stability.
• Use plumber's grease or washing-up liquid to aid movement, but avoid vaseline as it can damage the rubber.

This is a Genuine Spare Part from the original Tap Manufacturer of your Tap.

• Genuine = Proper fit, tested by the Manufacturer
• Compatible = Not made by your Tap’s brand. May not fit or last.

We’ve seen compatible parts cause leaks or damage. Choosing genuine parts protects your tap and warranty.