Carron Phoenix Flora Tap Valve
In recent installation guides this valve 3308R (133.0150.219 Cold /130.0120.220 Hot) is called 3794R (133.0358.053 Hot /133.0358.055 Cold).
It is the same valve.
Measurements: Splines: 28 / Nut Height: 9mm
Please Note: Some customers find it difficult to remove the EARLIER Valve 3308r. The later 3794R Valve might require a Mechanics socket wrench. For the earlier SP3308 Valve (133.0150.219 Cold /130.0120.220 Hot) which has 2 flat sides on the nut, You can buy a special tool from the Carron Phoenix Flora Tap Manufactuer to remove the EARLIER valve 3308R here.
The Hot and Cold Valve are not interchangeable as one opens clockwise and the other opens anti-clockwise.
Replace if your Tap is dripping from the Spout. Here is our Guide: 7 easy steps to replace Kitchen Tap Valve.
Recently we have noticed that the new valve is a little stiffer to push the handle onto. We have reported this back to the manufacturer but they assure us that there have been no changes of any consequence and it is just to do with the tolerance on the machining of the valves. If this does occur we would simply recommend ensuring that your own handle is clear inside of any residual debris and that you push the handle on and off the new valve a few times to loosen the splines slightly. You won’t damage your handle. Tightening your valve: We would also recommend that you do NOT overtighten this valve. As a rule of thumb, tighten as far as physically possible by hand, and then tighten 1/4 turn with an adjustable spanner.
Parts might be modified by the manufacturers as part of their continual improvements.
Parts might be modified by the manufacturers as part of their continual improvements.We cannot always guarantee that a part will fit an older version of a product. All spare parts that do not fit can be returned for a refund excluding shipping costs.
Shipping Information - (in Brief - see links below for more detailed information).
Spares Parts: For Mainland UK / N.I and ROI, Minimum of £4.50 to maximum of £6.00 with DPD 2-3 working days. For O Ring Kits (other than Perrin & Rowe) and Grub screws , we can ship Royal Mail Second Class and refund the excess shipping. Please note this in the Comment Box presented at the Shipping Address stage of your Order and we can refund the difference to you. For UK Offshore Islands, please email us firstname.lastname@example.org, as there is an additional surcharge. Click here for more information about all Shipping here.
Please also note that these shipping times apply to Mainland UK, NI and ROI Only. Please refer to our Shipping / Returns section for other destinations.
|Height||Diameter at thread||Splines||Nut Height|