Description

Genuine CDA TF55 Tap Valve and Cartridge

For the Hot side – 3819R Valve (but we recommend replacing with 1212R white)

For the Filtered Side – 3448R Cartridge

Diverter Cartridge 3448R

Also this is the brass casing 4144R that covers it (which might or might need to be replaced)

4144r covering 3448r

Brass Valve with ceramic discs :without thread.

Measurements 1212R
Overall height: 50mm
Nut Height: 6mm
Diameter at thread: 21mm
Splines: 20
Height of Splines: 8mm

1212R-C (cold Valve shown here. The Hot valve looks the same but has a nick in the nut).

Example of 1212R in a Tap

Measurements 3819R
Overall height: 50mm
Nut Height: 8mm
Diameter at thread: 21mm
Splines: 20
Height of Splines: 6mm

Valve 3819R (shown here the Hot valve. Cold valve is the same without a ‘nick’ in the nut )

Example of Hot 3819R in a Tap

Here is our Guide 7 Easy Steps to replace Kitchen Tap Valve.  If your Tap is dripping where the Spout meets the Base you might need to replace your Tap O Ring Kit

Parts might be modified by the manufacturers as part of their continual improvements. We cannot always guarantee that a part will fit an older version of a product. All spare parts that do not fit can be returned for a refund excluding shipping costs.

Shipping Information : Please allow for Delays outside our control due to Covid-19 - (in Brief - see links below for more detailed information is our Normal Shipping Times if not delays).

Spares Parts: For Mainland UK / N.I and ROI, Minimum of £4.50 to maximum of £6.00 with DPD 2-3 working days. For UK Offshore Islands, please email us sales@tapsandsinksonline.co.uk, as there is an additional surcharge. Click here for more information about all Shipping here.

Please also note that these shipping times apply to Mainland UK, NI and ROI Only. Please refer to our Shipping / Returns section for other destinations.