Franke Bridge Mixer Kitchen Tap Valve
Height 65mm / Diameter at thread 21mm / Splines 24 / Nut Height 5mm
***This is the current 3656R (SP3656). The older 3565R Valve is discontinued. This older Valve has same spline count, 24 splines, but the splines on the older Valve were slightly wider, and as the New 3565R Valve has 24 splines, but are narrower, the current 3565R Valve is incompatible with the older Franke Bridge Tap Handle. We do not stock the older Franke Bridge Tap Handle. Only the current modified version which you can find here. You can check your own Valve prior to ordering to see whether or not you need to order a New Handle as well. One obvious difference is that the Nut on the New Valve is stepped. ***
If you order a Handle, and it is not required, you can return it.
But please note that the handle that we supply with this Tap does NOT have the Franke Logo on it.
Full details of our Returns policy is here.
A kitchen tap with a compression valve is recommended to use if you have very low water pressure on the hot water side of your kitchen tap.
See our blog on this for more information – low hot water pressure from your kitchen tap.
If your Tap is dripping from the Spout then you might need to change your Valves. Here is our Guide 7 Easy Steps to replace Kitchen Tap Valve.
If your Tap is dripping where the Spout meets the Base you might need to replace your Franke Bridge Mixer Tap O Ring Kit 1506R
Here is the link to all our Franke Bridge Mixer Kitchen Tap Spare Parts.
This is a Genuine Spare Part.
Parts might be modified by the manufacturers as part of their continual improvements. We cannot always guarantee that a part will fit an older version of a product. All spare parts that do not fit can be returned for a refund excluding shipping costs.BREXIT:
Brexit will have no financial impact on our GB customers once your Order is less than £135.
There will be No Vat on Imports, No Customs Charges, No extra or hidden charges once your Total Order is less than £135. We will remind you again about this at the Checkout stage before you complete (pay) for your Order. For further details please see our Brexit section here.
Shipping Costs (P&P):
Post (Not trackable) £2/£3.50 / Courier (Trackable) £5/£7: We make no profit from Shipping (what we charge for Couriers does not even cover full cost). For very small items: Screws, O Ring Kits, Aerators & some Bushes, we Post (£2/£3.50) . Where we Post, and you have been incorrectly charged Courier Rate £5/£7, we will refund the excess shipping charge to you. Some Bushes due to size cannot be posted. Shipping costs include VAT and costs of packaging. If you do not want a small item posted, but would prefer it to be Couriered, please email us when you have placed your order as you might be required to pay an additional charge to cover the increased Shipping Costs.
Shipping Times (Prevent unnecessary delays - Put in correct details at Checkout) :
ROI / NI approx 2 days delivery by Courier (Post might take longer). GB: Due to new Brexit rules, items going to GB are taking longer than previously. This is outside of our Control. It currently takes approx 1 week for goods, once dispatched with DPD, to be delivered. It will take longer by Post. Click here for more detailed information about all Shipping & Returns. For UK Offshore Islands:
Where we Ship to ?:
We are currently only shipping to England, Scotland, Wales, NI and ROI. We are currently unable for logistical & customs reasons to ship to Channel Islands, Isle of Man or any Isles off mainland GB. All we can suggest is that you might be able to have the Order shipped to GB and from the there get it shipped on to your own address if it is one of the destinations that we currently do not ship to.