Taps And Sinks Online

Franke Davos SM Kitchen Tap Valve



Franke Davos SM Kitchen Tap Valve – From May 2007
Cold Valve Fun code 133.0438.152
Hot Valve Fun code 133.0438.154
for the Cold Water side or Hot Water side of your Kitchen Tap.  Fun code We do not stock parts for Davos 1999 to 2007.  See below for picture of this Tap.

There is no Brass Bushes required for this Tap.

If your Tap is dripping from the Spout then you might need to change your Valves.  Here is our Guide 7 Easy Steps to replace Kitchen Tap Valve. Please see below regarding Manufacturer Valve change before ordering.

If your Tap is dripping where the Spout meets the Base you might need to replace the O Ring Kit/


Davos Tap from Franke Davos Tap from Franke Davos J Tap from Franke Franke Davos J Tap

Before ordering replacement valve please see below for further information, images and measurements on the Manufacturers change of Valve from 1427R Cold (133.0069.364) and 1427R Hot (133.0069.365) to SP3547 Cold (133.0358.165) and SP3547 Hot (133.0358.167). The manufacturer recommends that you order universal 1427R if replacing your valve.  If your valve has 18 splines (earlier valve) we do not have this valve.

Franke Davos SM Tap Valve

In 2014 the Franke Davos SM Tap Valve was changed by manufacturer from the 1427R Valve to the SP3547. Your installation guide will tell you exactly which part to order. EITHER valve IS compatible once you have the Davos Tap (although we do NOT stock the even earlier version with 18 splines).
We have provided here measurements and images of both valves for reference if you don’t have your installation guide as otherwise you might receive a valve that looks different from your own valve, when you remove it, and think that you were sent the WRONG valve.  If you are not sure then EMAIL us sales@tapsandsinksonline.co.uk prior to ordering (and if you have removed your own valve, email us the picture together with any markings that is stamped on it).

Measurements 1427R
Overall height: 53mm
Nut Height: 8mm
Diameter at thread: 21mm
Splines: 28
Height of Splines: 10mm

1427R Tap Valve

1427R Tap Valve (Cold Valve shown here)

Measurements SP3547
Overall height: 53mm
Nut Height: 6mm
Diameter at thread: 21mm
Splines: 28
Height of Splines: 11mm

SP3547R (shown here Hot Valve)

SP3547R (shown here Hot Valve)



We do not stock spare Parts for Franke Davos 1990 to 2007 (see the locking nut at the base of the spout (where the spout meets the tap base). It is smaller and more curved than the current Davos Tap locking nut and this is a key way of distinguishing which tap you have.

Davos 1990 2007

We do not stock Spare Parts for Franke Davos 1990 to 2007, only for Davos from 2008.

davos 2008 to old Davos locking nut

How to tell Davos apart – see Locking nut detail. We stock the Davos Spare parts from 2008

Please note that rarely, a customer, when fitting the 4276R valve with white seal underneath, reports a slight gap between handle and body of the tap. This is due to the larger white seal. This seal will flatten with use. If you wish to buy the 3547R and your tap continues to drip, we will not replace under 1 year warranty if your Tap is 2014 or older. Please retain your old valve as proof of age of your own Tap. The valve will have a date stamped on it.

Franke Davos SM SP3547 Valve in Tap

Franke Davos SM SP3547 Valve in Tap

Parts might be modified by the manufacturers as part of their continual improvements. We cannot always guarantee that a part will fit an older version of a product. All spare parts that do not fit can be returned for a refund excluding shipping costs.

Shipping Information:

We ship from Ireland. DPD have notified us that they are experiencing shipping delays in GB due to Brexit (Customs). They currently advise us that these delays are temporary. However, as per the Large Popup notice on our website that is there until you Dismiss it, you should allow a minimum of 1-2 weeks delays for your order to be cleared by customs. This backlog is due to the volume of goods now going to /from GB that have to go through Customs from January 1, 2021 due to Brexit. It is outside of our control. (There will be no extra or hidden charges with your order).

We intend that Brexit will have no financial impact on our customers.

For further details please see our Brexit section here.

Spares Parts: For Mainland GB / N.I and ROI, Minimum of £4.50 to maximum of £6.00 with DPD 2-3 working days (excluding the impact of Covid-19/Brexit Transition). Click here for more detailed information about all Shipping & Returns.

For UK Offshore Islands:

We apologise for any inconvenience but we are currently only shipping to England, Scotland, Wales, NI and ROI, excluding any Isles.

We are currently not shipping to Channel Islands, Isle of Man or any Isles.



Troubleshooting Guide

Troubleshooting Guide


There are no reviews yet.

Be the first to review “Franke Davos SM Kitchen Tap Valve”

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

You may also like…


Your Cart