Taps And Sinks Online

Franke Eiger U-Spout Tap Brass Bush 3868R

£10

Franke Eiger U-Spout Tap Brass Bush 3868R. You might need this part if, when you try to remove your Eiger Tap Valve to replace it, the Brass Bush comes out with it as well. If your Tap is dripping from the Spout changing the Valves should fix this. Here is the link to all our Franke Eiger U-Spout Kitchen Tap Spare Parts.

There is one bush per Valve so if you think you need one for each valve please order Two. If only replacing one valve, then you only need to order One Bush There is no difference between the Bush for the Cold Valve or the Bush for the Hot Valve.

See below for more images / information.

Description

Franke Eiger U-Spout Tap Brass Bush 3868R

Measurements of 3868R Brass Bush

  • Outside Diameter: 29mm
  • Inside Diameter: 19mm
  • Viewed Height on Tap: 14mm
  • Overall Height: 20mm

The Brass Bush might be required if fitting new valve and the existing brass bush can not be separated from the old valve that is being replaced. If you can remove the existing valve without removing the brass bush then you might not require this spare part, or if the leak stops just by replacing the Valve, then you can return the Brass bush for a refund.

It can be a common enough problem that when you remove your Kitchen Tap Valve it looks different than the valve in the picture (or the Valve that you purchased from us). It is most likely because the brass bush is still attached.
Here is the Franke Eiger Tap Valve

Franke Eiger Valve (brass bush is not attached)

Franke Eiger Valve (brass bush is not attached)

Franke Eiger Tap Valve with Brass Bush attached

Franke Eiger Tap Valve with Brass Bush attached

If the Valve is stuck inside the Brass Bush then you will have to separate them OR buy a Brass Bush as well.

For tips on how to separate a Valve from a Brass Bush, see here.

Parts might be modified by the manufacturers as part of their continual improvements. We cannot always guarantee that a part will fit an older version of a product. All spare parts that do not fit can be returned for a refund excluding shipping costs.

Shipping Information:

We ship from Ireland. DPD have notified us that they are experiencing shipping delays in GB due to Brexit (Customs). They currently advise us that these delays are temporary. However, as per the Large Popup notice on our website that is there until you Dismiss it, you should allow a minimum of 1-2 weeks delays for your order to be cleared by customs. This backlog is due to the volume of goods now going to /from GB that have to go through Customs from January 1, 2021 due to Brexit. It is outside of our control. (There will be no extra or hidden charges with your order). For very small items such as grub screws and O Ring Kits, we will post (again allow some delays) and refund the excess shipping charge .

We intend that Brexit will have no financial impact on our customers.

For further details please see our Brexit section here.

Spares Parts: For Mainland GB / N.I and ROI, Minimum of £4.50 to maximum of £6.00 with DPD 2-3 working days (excluding the impact of Covid-19/Brexit Transition). Click here for more detailed information about all Shipping & Returns.

For UK Offshore Islands:

We apologise for any inconvenience but we are currently only shipping to England, Scotland, Wales, NI and ROI, excluding any Isles.

We are currently not shipping to Channel Islands, Isle of Man or any Isles.

 

You may also like…

0

Your Cart