Franke Olympus G Brass Bush with Lip SP3886

£10

In stock

Franke Olympus G Brass Bush with Lip SP3886.  This part was previously known as 3886R and has been renamed SP3886 in current Franke Installation Guides.  It is the same part. Please read below before ordering.

This is the part that surrounds the Valve inside the Tap.  Sometimes when removing the old Valve, this brass bush also comes out i.e. the valve and brass bush appear as one.  They need to be separated to re-use the old brass bush with the new valve, or if neither can be separated, then you have to purchase a new brass bush as well as a new valve to fix your dripping tap.

Description

Franke Olympus G Brass Bush with Lip SP3886

Measurements: 3886R Brass Bush with Lip
Outside Diameter: 24mm
Outside Diameter at lip: 27mm
Overall Height: 19mm

You might have the later brass bush with recess SP3868 or the even earlier brass bush with narrower lip that we do not stock.  We would recommend that you remove your own valve prior to ordering and that way you will order the correct part as you can compare it to all the information here.

A NEW Brass Bush might be required if you are replacing your Tap Valve and the Brass Bush Part has come away with your old valve i.e. your old valve is stuck inside (stuck to) the Brass Bush.  If you cannot separate the Brass Bush from your old valve then you will need a new one.

It can be a common enough problem that when you remove your Kitchen Tap Valve it looks different than the valve in the picture (or the Valve that you purchased from us). It is most likely because the brass bush is still attached.

Here is our guide Removing Brass Bush ring from Valve

Used SP3547 Valve inside Brass Bush SP3886

Old SP3547 Valve inside Brass Bush SP3886

Old Valve 1427R inside Brass Bush 3886

Old Valve 1427R inside Brass Bush 3886

 

 

 

 

 

 

Brass Bush that we do not stock:

old olympus brass bush with liP DETAIL

Old Olympus brass bush with lip that we do not stock.

Parts might be modified by the manufacturers as part of their continual improvements. We cannot always guarantee that a part will fit an older version of a product. All spare parts that do not fit can be returned for a refund.

Shipping Information (in Brief - see links below for more detailed information).

Spares Parts: Minimum of £4.50 Royal Mail First Class 3-5 days to Maximum £6.00 Parcel Force Track & Trace , Signature Required, 2 - 3 days after dispatch day. Click here for more information about all Shipping here.

Please note that these shipping times apply to Mainland UK Only. Please refer to our Shipping / Returns section for other destinations.
Share on:
Share on FacebookTweet about this on TwitterPin on PinterestEmail this to someone

You may also like…

0

Your Cart