Taps And Sinks Online

Franke Triflow Olympus Tap Valve



Spare Franke Triflow Olympus Tap Valve (Hot, Mains  Cold and Cold Filtered) if your Tap is dripping from the Spout.  This Trfilow Tap was discontinued Spring 2011 and the replacement model looks very similar (identical) but takes a DIFFERENT valve.  If you remove your own Valve and SMR or San Marco is stamped on it then you need a different Valve which is called the Filterflow Olympus Tap Valve    The valve shown here is for the Earlier model and will have Avillion, Perrin & Rowe, Triflow or TCL stamped on it.




Please see below for more information before ordering :



Franke Triflow Olympus Tap Valve

This Franke Triflow Olympus Tap was discontinued 2011.

This Franke Triflow Olympus Tap takes 3 valves (1 Hot FR9762 and 1 Cold FR9763 and 1 Filtered Cold FR9764).  If your Franke Triflow Olympus Tap is dripping where the spout meets the base then you need to replace your O Ring Kit which you can find here.

Triflow Olympus (Valve shown here) or Filterflow Olympus ? It is easy check which version you have:

The simplest way is to check the markings on your Valve.  If you have the version for sale here, you will have either Avillion / Perrin & Rowe /Triflow or TCL stamped on your Valve.  If your Valve has SMR or San Marco stamped on it, this is the Filterflow Valve and is not this valve here.  That’s for sale on the website under the name Franke Filterflow Olympus Valve.

Other distinguishing differences between the earlier Triflow Olympus Version and the later Filterflow Olympus  Version:

The Franke Triflow Olympus valve has 20 Splines only one set of threads below the black rubber O Ring, whereas the Franke Filterflow Olympus Valve has 28 Splines and two sets of threads, one above the black rubber O Ring and one below it. The Filterflow Olympus valves 1427R – H and 1427R – C can be found here.

Tip: If your water is dripping from the Cold side and you don’t know whether it is the Cold Mains valve or the Cold Filter Valve that needs replacing, try the replacement valve in one of the cold sides and if drip continues switch. If drip still continues then you either need 2 Cold valves i.e. both need replacing, or the drip is on the Hot Water side.


FR9762 With Vernier and C Clip removed

Overall Height: 53mm
Diameter at thread:  21mm
No of Splines (teeth at top):  20
Nut Height:  8mm


If a part is not suitable it can be returned. Our parts are supplied based on the current technical specifications from the manufacturers.

This is a Genuine Spare Part.

Parts might be modified by the manufacturers as part of their continual improvements. We cannot always guarantee that a part will fit an older version of a product. All spare parts that do not fit can be returned for a refund excluding shipping costs.

Shipping Information : Please allow for Delays outside our control due to Covid-19 - (in Brief - see links below for more detailed information is our Normal Shipping Times if not delays).

Spares Parts: For Mainland UK / N.I and ROI, Minimum of £4.50 to maximum of £6.00 with DPD 2-3 working days. For UK Offshore Islands, please email us sales@tapsandsinksonline.co.uk, as there is an additional surcharge. Click here for more information about all Shipping here.

Please also note that these shipping times apply to Mainland UK, NI and ROI Only. Please refer to our Shipping / Returns section for other destinations.


Troubleshooting Guide

Troubleshooting Guide

Triflow Olympus Valve Change Guide


There are no reviews yet.

Be the first to review “Franke Triflow Olympus Tap Valve”

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

You may also like…


Your Cart