Howdens Lamona Victorian Chrome Black Tap4807 Valve
If your Howdens Lamona Victorian Chrome Black Tap4807 Valve is dripping continuously then you might need to change your Valves. If it is only dripping intermittently then it is possible that debris is stuck behind the Aerator at the tip of the spout. Here is our Guide 7 Easy Steps to replace Kitchen Tap Valve. If your Tap is dripping where the Spout meets the Base you might need to replace your O Ring Kit.
To make it easier for you we have included pictures here of what your Valve should look like (with or without the bush around it) and also a picture of the other Howdens Lamona Victorian Tap4801 Valve as that is a different looking valve. Ideally you should remove your own valve before ordering a replacement valve to esnure that you order the correct one and that way you would also know if you require the brass bush or not.
Nut Height: 8, Splines: 28, Overall height: 53mm, Diameter at thread: 21mm
It can be a common enough problem that when you remove your Howdens Lamona Victorian Tap Valve it looks different than the valve in the picture (or the Valve that you purchased from us). It is most likely because the brass bush is still attached OR you have the Lamona Victorian Tap4801 Valve.
Here is the same Howdens Lamona Chrome and Black Victorian Tap4807 Valve
If the Valve is stuck inside the Brass Bush then you can purchase the Brass Bush.
For tips on how to separate a Valve from a Brass Bush, see here.
Here is a link to all the Howdens Lamona Victorian Tap4802 and Tap4822 parts that we stock.
Parts might be modified by the manufacturers as part of their continual improvements.
Parts might be modified by the manufacturers as part of their continual improvements.We cannot always guarantee that a part will fit an older version of a product. All spare parts that do not fit can be returned for a refund excluding shipping costs.
Shipping Information - (in Brief - see links below for more detailed information).
Spares Parts: For Mainland UK / N.I and ROI, Minimum of £4.50 to maximum of £6.00 with DPD 2-3 working days. For O Ring Kits (other than Perrin & Rowe) and Grub screws , we can ship Royal Mail Second Class and refund the excess shipping. Please note this in the Comment Box presented at the Shipping Address stage of your Order and we can refund the difference to you. For UK Offshore Islands, please email us firstname.lastname@example.org, as there is an additional surcharge. Click here for more information about all Shipping here.
Please also note that these shipping times apply to Mainland UK, NI and ROI Only. Please refer to our Shipping / Returns section for other destinations.