Kitchen Tap Spout SP3926
Please read the details below if you have an earlier Spout (Installation Guide Part listed as 3218R). Later Installation Guides have part listed as SP3926. If your Installation Guide lists Part SP3926 then you do not need to check the measurements of your own Spout.The pictures below of the O Ring Kit on the website show the O Ring Kit layout.
The earlier version of this spout has 1 white ptfe o ring and 2 black (3218R) and if your own spout is like this, there should be no issue fitting the current 3926R spout.
However, if your own spout looks like the picture with the X marked showing 1 large white PTFE ring, 2 black and one narrow small white ptfe ring located over a tiny protruding lip at the end of the spout, we do not have this spout.
If you only require the O Ring Kit i.e. your Tap is dripping from the Base, and do not need to replace the complete spout, you can buy the O Ring Kit 1425R here.
If you need to replace the entire Spout, then we recommend that you remove your own Spout (see DIY Guide below) to take a measurement of your own Spout from the start of the groove / indentation of the largest white PTF O Ring to the very end of your Spout. It should measure c.27.9mm.
However, If your own Spout measures differently – shorter (see images below REF 3258R), then this Spout may or may not fit.
Here is our guide How to remove Kitchen Tap Spout.
Why are our Spouts 'on Sale' ? All our Spouts are Brand New, sourced directly from Your Tap manufacturer. They are not seconds. We also inspect every Spout before shipping to ensure that the product is perfect. However, on very rare occasions a New Spout might have a tiny mark missed by the manufacturer and our checkers. To compensate for this, in case it might happen, we have discounted our spouts by 15% to 20% off the full RRP, if you decide to buy one here. Below is an example of what we mean and while the image shows a mark on a stainless steel spout, it could equally apply to a chrome spout.
Here is our guide How to change a Kitchen Tap Spout.
This is a Genuine Spare Part.
Parts might be modified by the manufacturers as part of their continual improvements. We cannot always guarantee that a part will fit an older version of a product. All spare parts that do not fit can be returned for a refund excluding shipping costs.
We ship from Ireland. DPD have notified us that they are experiencing shipping delays in GB due to Brexit (Customs). They currently advise us that these delays are temporary. However, as per the Large Popup notice on our website that is there until you Dismiss it, you should allow a minimum of 1-2 weeks delays for your order to be cleared by customs. This backlog is due to the volume of goods now going to /from GB that have to go through Customs from January 1, 2021 due to Brexit. It is outside of our control. (There will be no extra or hidden charges with your order). For very small items such as grub screws and O Ring Kits, we will post (again allow delays) and refund the excess shipping charge.
We intend that Brexit will have no financial impact on our customers.
For further details please see our Brexit section here.
Spares Parts: For Mainland GB / N.I and ROI, Minimum of £4.50 to maximum of £6.00 with DPD 2-3 working days (excluding the impact of Covid-19/Brexit Transition). Click here for more detailed information about all Shipping & Returns.
For UK Offshore Islands:
We apologise for any inconvenience but we are currently only shipping to England, Scotland, Wales, NI and ROI, excluding any Isles.
We are currently not shipping to Channel Islands, Isle of Man or any Isles.