Taps And Sinks Online

Lamona Garda Tap3521 Valve



Lamona Garda Tap3521 Valve .  If your  Lamona Garda Tap3521 Tap is dripping from the Spout then you might need to change your Valves.  Here is our Guide 7 Easy Steps to replace Kitchen Tap Valve.
please read carefully all the information below before ordering in case you have a really old Garda Tap with 20 spline valve or that you require a brass bush. 
If your Lamona Garda Tap3521 Tap is dripping where the Spout meets the Base you might need to replace your O Ring Kit.



Lamona Garda Tap3521 Valve
In some very rare instances we have come across an old Garda Tap with 20 spline valve / 50mm tall , stamped San Marco Valve. You can remove your own handle and check the splines before ordering to eliminate ordering the wrong valve. In 99% of the Garda, it is the 28 spline valve. There are images below showing the 20 spline and the 28 splines. If you need to order the 20 spline valve, this is old 1212R Valve and you can order this here.

Nut Height: 8, Splines: 28, Overall height: 53mm, Diameter at thread: 21mm
As this Tap was modified over the years, we supply the original white sealed valve version as this covers all modifications. The Hot Valve opens clockwise and the Cold Valve opens anticlockwise.

Useful Tip

It can be a common enough problem that when you remove your  Valve it looks different than the valve in the picture. It is most likely because the brass bush is still attached.

For tips on how to separate a Valve from a Brass Bush, see here.

If the Valve is stuck inside the Brass Bush then you will have to separate them OR buy a Brass Bush as well

3561R Valve surrounded by Brass Bush 3868R

3561R Valve surrounded by Brass Bush 3868R


Detailed Shipping / Returns information can be found here.
In Brief:
- Small items only by Post: £2/£3
- Courier Delivery DPD Track & Trace: £5
- BREXIT: No additional charges on delivery once your Order before shipping charges is less than £135.

Troubleshooting Guide

Troubleshooting Guide


  1. Peter Dean

    Have just purchased the 3521 Valve. Firstly it took a purchase of a socket set to unscrew the old one. Unfortunately the NEW VALUE is longer! the Nut being almost twice the thickness. Hence after tighten the New value and replacing the end Chrome attachment there is around a5mm gap.

    • Alice

      Hi Peter
      i would need to see a picture of your own tap to see what tap you actually have because the 3521r tap does take a 53mm tall valve. Also can you please email me pictures of the part that was in your own tap as well.

Add a review

This site uses Akismet to reduce spam. Learn how your comment data is processed.

You may also like…


Your Cart