Taps And Sinks Online

Lamona Garda Tap3562 Valve



Lamona Garda Tap3562 Valve . This is a monobloc tap. The cold part here is not the same as the Cold Part in a Garda Filter Tap. If you have a Garda Filter Tap, please see here. If your  Lamona Garda Tap3562 Tap is dripping from the Spout then you might need to change your Valves.  Here is our Guide 7 Easy Steps to replace Kitchen Tap Valve.
please read carefully all the information below before ordering in case you have a really old Garda Tap with 20 spline valve or that you require a brass bush.
If your Lamona Garda Tap3562 Tap is dripping where the Spout meets the Base you might need to replace your O Ring Kit.



Lamona Garda Tap3562 Valve

Nut Height: 8, Splines: 28, Overall height: 53mm, Diameter at thread: 21mm
As this Tap was modified over the years, we supply the original white sealed valve version as this covers all modifications. The Hot Valve opens clockwise and the Cold Valve opens anticlockwise.

Useful Tip

It can be a common enough problem that when you remove your  Valve it looks different than the valve in the picture. It is most likely because the brass bush is still attached.

For tips on how to separate a Valve from a Brass Bush, see here.

If the Valve is stuck inside the Brass Bush then you will have to separate them OR buy a Brass Bush as well

3561R Valve surrounded by Brass Bush 3868R

3561R Valve surrounded by Brass Bush 3868R


Detailed Shipping / Returns information can be found here.
In Brief:
- Small items only by Post: £2/£3
- Courier Delivery DPD Track & Trace: £5
- BREXIT: No additional charges on delivery once your Order before shipping charges is less than £135.

Troubleshooting Guide

Troubleshooting Guide


There are no reviews yet.

Be the first to review “Lamona Garda Tap3562 Valve”

This site uses Akismet to reduce spam. Learn how your comment data is processed.

You may also like…


Your Cart