Lamona Victorian Bridge Tap Valve 3561R



Lamona Victorian Bridge Tap Valve 3561R

If your Tap is dripping from the Spout then you might need to change your Valves.  Here is our Guide 7 Easy Steps to replace Kitchen Tap Valve.  If your Tap is dripping where the Spout meets the Base you might need to replace your O Ring Kit.

Nut Height: 8, Splines: 28, Overall height: 53mm, Diameter at thread: 21mm

For more information see below.


Lamona Victorian Bridge Tap Valve 3561R.

As this Bridge Lever Tap has levers that are Horizontal when the tap is turned off and are turned towards the middle of the tap to turn the water On, the valves need to work in the opposite way to a typical two lever tap. A Valve opens Clockwise or Anti-Clockwise. In a Standard Two Lever Tap (non-Bridge) the levers operate Vertically i.e you pull the Lever down towards you to Turn On and Push back Up to Turn Off. In a Bridge Mixer Tap the Levers are turned Horizontally i.e You pull the Lever towards the Centre of the Tap to Turn On, and Push back to Turn Off. If your Bridge Lever Tap is fitted correctly, then when the Tap is in the OFF position, the Levers point outwards, and the Hot Feed is on the Left side of your Tap as you face your Tap i.e stand in front of it. You then need to Order an Anti-Clockwise Valve for the Hot Side and a Clock-wise Valve for the Cold Feed (which would be on your right). 'Hot' valves are Clockwise, and Cold Valves are Anti-Clockwise, so in effect you will be ordering a 'Cold' Anti-Clockwise Valve for the Hot Side of your Bridge Lever Tap, and a 'Hot' Clockwise Valve for the 'Cold' Side of your Tap e.g. the opposite of what you would order if you had a standard Two Lever Tap where Levers are operated vertically. .

It can be a common enough problem that when you remove your Kitchen Tap Valve it looks different than the valve in the picture (or the Valve that you purchased from us). It is most likely because the brass bush is still attached.

3561R Valve and Brass Bush 3868R separate

3561R Valve and Brass Bush 3868R separate.

Here is the same Valve stuck inside the Brass Bush.

3561R Valve surrounded by Brass Bush 3868R

3561R Valve surrounded by Brass Bush 3868R.


If the Valve is stuck inside the Brass Bush then you will have to separate them OR buy a Brass Bush as well. Please contact us if this is the case.

For tips on how to separate a Valve from a Brass Bush, see here.

Parts might be modified by the manufacturers as part of their continual improvements. We cannot always guarantee that a part will fit an older version of a product. All spare parts that do not fit can be returned for a refund excluding shipping costs.

Shipping Information - (in Brief - see links below for more detailed information).

Spares Parts: Minimum of £4.50 Royal Mail First Class 3-5 days to Maximum £6.00 Parcel Force Track & Trace , Signature Required, 2 - 3 days after dispatch day, but please allow for delay. Click here for more information about all Shipping here.

Please note that these shipping times apply to Mainland UK Only. Please refer to our Shipping / Returns section for other destinations.


Troubleshooting Guide

Troubleshooting Guide


There are no reviews yet.

Be the first to review “Lamona Victorian Bridge Tap Valve 3561R”

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

You may also like…


Your Cart