Teka BTK112 Tap Valve 3547R (3561R)

£14£28

Clear

Teka BTK112 Tap Valve 3547R (3561R) You will buy from this product link here if your Valve looks like the 3547R but has a date stamp on it EARLIER than 2014.

The Current 3547R Valve is stamped 2014 onwards (and you see it in Franke and Carron Installation guides). There is an earlier SMR 3547R valve that is different from the current 3547R Valve. Unfortunately the Discontinued Old Valve looks like the New Valve But the key difference is that the current valve has a flatter seal. If you have the earlier Valve ((stamped 2013 or earlier – the valve is stamped month / year  as on a Bank Card e.g  06/13, 07/12) then you should purchase this valve here.  You will receive a two threaded version called 3561R which the manufacturer of your Tap recommends that you use if you have the earlier ‘discontinued’ one threaded valve (dated 2013 or earlier).  However, if you have an Installation Guide that states 3547R (or SP3547) then you need to go back to the other Valve link here which will supply you with a one threaded 3547R valve .  Your Valve will have a 2014 or later stamp on it and then you can buy the actual current 3547R.    Any Franke Installation Guide that specifies the SP3547 – this is this valve here.

Here is our Guide 7 Easy Steps to replace Kitchen Tap Valve.

If your Tap is dripping where the Spout meets the Base you might need to replace the O Ring Kit.

Description

Teka BTK112 Tap Valve 3547R (3561R)

Measurements 3547R
Overall height: 53mm
Nut Height: 6mm
Diameter at thread: 21mm
Splines: 28
Height of Splines: 11mm

SMR-3547R (Hot valve shown here)

SMR-3547R

SMR-3547R (Hot valve shown here)

Measurements 3561R
Overall height: 53mm
Nut Height: 8mm
Diameter at thread: 21mm
Splines: 28
Height of Splines: 10mm

Spare Tap Parts 3561R – Cold Valve shown here

3561R with 28 splines (Cold Valve shown here )

3561R with 28 splines (Cold Valve shown here )

 

 

 
If your valve is stamped 2014 Onwards, then you can buy the SMR 3547R :
 

Parts might be modified by the manufacturers as part of their continual improvements. We cannot always guarantee that a part will fit an older version of a product. All spare parts that do not fit can be returned for a refund.

Shipping Information (in Brief - see links below for more detailed information).

Spares Parts: Minimum of £4.50 Royal Mail First Class 3-5 days to Maximum £6.00 Parcel Force Track & Trace , Signature Required, 2 - 3 days after dispatch day. Click here for more information about all Shipping here.

Please note that these shipping times apply to Mainland UK Only. Please refer to our Shipping / Returns section for other destinations.

 

 

Troubleshooting Guide

Troubleshooting Guide

0

Your Cart