Archive for Helpful Tips
From Perrin and Rowe (Avillion / Triflow / Atriflo) It should be an easy matter to change the Valve & Vernier Insert if you follow these simple instructions from Perrin and Rowe (Avillion) and refer to the diagrams below. 1) Turn off water supplies to tap. Place plug in waste to prevent loss of small […]
Continue Reading →Posted in: Helpful Tips, How to....
Leave a Comment (0) →When your Tap was first produced the manufacturer used a valve which had 2 flat sides on the nut (SP3308 (aka 3308R). This Valve has been discontinued and the manufacturer now uses a very similar valve with a six sided nut, SP3794 (aka 3794R). The Hot and Cold Valve are not interchangeable: The Hot opens […]
Continue Reading →O Ring Kit Seal kit Changing Procedure for the Perrin and Rowe Mixer Tap. It should be an easy matter to change the O Ring Kit (seal kit) in your tap if you follow these simple instructions. To remove the Spout: 1) Turn off the water supplies to the mixer tap. Place plug in to […]
Continue Reading →Eiger Tap 115.0049.989 Chrome Eiger Tap 115.0049.990 SilkSteel Note: At the end of this blog are links to all the Spare Parts referred to throughout the Blog for ease of reviewing / purchasing. Here are the 3 main causes as to why your Franke Eiger Tap dripping : 1. Franke Eiger Tap dripping from the […]
Continue Reading →It should be an easy matter to change the Valve & Vernier Insert if you follow these simple instructions and refer to the diagrams below. 1) Turn off water supplies to tap. Place plug in waste to prevent loss of small pieces. 2) Remove Boss A by unscrewing in an anticlockwise direction from Valve C. […]
Continue Reading →