Archive for Howdens Lamona Kitchen Taps Spare Parts Guides
Posted by Alice F on 26/06/2023
If your Howdens Lamona HI Tech Tap dripping its usually the valve or the o rings (at the base of the spout) that need replacing There are several versions of this tap – some with 20 spline valves, some with 24 splines and the Howdens Hi- Tech Chrome Tap3407 Tap has 28 splines. If you […]
Continue Reading →
Posted by Alice F on 21/06/2023
If you’re looking for a stylish and practical kitchen tap, the Howdens Calaggio Tap is an excellent choice. With a sleek design and a range of colour options, this tap is sure to complement any kitchen décor. This stylish Tap by Howdens has come out in many different model colours. Here are just some examples […]
Continue Reading →
Posted by Alice on 26/10/2021
This is a common issue and for the purposes of this blog post we are assuming that we have shipped your order correctly . Two lever tap (not a bridge tap) The hot valve for hot water feed (usually on the left) opens clockwise & the cold valve for the cold water feed (usually on […]
Continue Reading →
Posted by Alice on 23/02/2021
If your Kitchen Tap is dripping where the spout meets the base of the tap then usually a new set of O Rings should fix this problem. Troubleshooting : I have fitted O Ring Kit and tap is still leaking ? This could be due to how the O Ring Kit is fitted, so please check again. […]
Continue Reading →
Posted by Alice on 29/02/2020
Here below are examples of actual Valves in Taps to assist with Identification (or check) and some additional information to assist you in making the correct purchase. Remember, you can always return any unused parts or email us sales@tapsandsinksonline.co.uk for further advice / help. We are used to reviewing taps and parts and can quickly […]
Continue Reading →