Archive for Franke Tap Spare Parts Guides
Franke Triflow Doric Spec sheet with part numbers. Connectors: 9.030617 – G ¼ m X ¼ Push fit connector – used to connect the green tube to the plastic housing 9.030618 – G ¼ m x 3/8 Push fit connector – used to connect the blue tube to the plastic housing Tubing: 9.280403 green tube […]
Continue Reading →Eiger Tap 115.0049.989 Chrome Eiger Tap 115.0049.990 SilkSteel Note: At the end of this blog are links to all the Spare Parts referred to throughout the Blog for ease of reviewing / purchasing. Here are the 3 main causes as to why your Franke Eiger Tap dripping : 1. Franke Eiger Tap dripping from the […]
Continue Reading →Please note that the Franke Triflow Olympus was discontinued in Spring 2012 and replaced with the Franke Olympus Filterflow. The parts are not the same. If you do NOT know whether you have the Triflow or Filterflow version, please read this blog here. Connectors: 9.030617 – G ¼ m X ¼ Push fit connector […]
Continue Reading →Your Franke Ascona Tap dripping … Note: At the end of this blog are links to all the Spare Parts referred to throughout the Blog for ease of reviewing / purchasing. Here are the 3 main causes as to why your Franke Ascona Tap dripping : 1. Franke Ascona Tap dripping from the Spout If […]
Continue Reading →If your Franke Zurich Tap dripping from either (1) the spout (2) the handle or (3) where the spout meets the base. Please note that the Zurich ‘Filter Tap’ takes a different COLD Diverter Cartridge but otherwise, the same guide applies to the Filter Tap version of the Zurich as to the non-filter Version. The […]
Continue Reading →