Genuine Franke Fuji Tap Parts – A guide to all the variations
Genuine Franke Fuji Tap Parts available here on our Store.
I have to admit that it can get complicated with all the different versions of the Franke Fuji Taps , be it the monobloc or pull out version)
Here below is a summary in picture of the 4 Fuji Taps with a J (Swan) Spout
So from there, the simplest way to start is is :
Do you the Monobloc ? or Pull-out Nozzle Or U Shaped.
Franke Fuji Tap Parts (i.e the non pull out versions)
Franke Fuji Tap Parts (i.e the non pull out versions)
There are 2 – but in terms of the most common parts that require replacing i.e the Cartridge (different codes, but the same ) and the O Rings (same rings but different grub screws so just hold onto your own as a fall-back) so in other words, it doesnt really matter, if it is just these two parts, which one you order from. If you require other parts eg a replacement handle, all you have to do is look closely: the earliest version has a slight difference in the handle detail… see where the handle meets the body of the tap ? the later versions have a groove cut out to enable the hand to be pulled down. See example of this groove we refer to
- Fuji – Chrome/SilkSteel : Production Date (approx.) : Dec 2003 – March 2012 . Genuine Parts here.
- Fuji Version 2 – Chrome/SilkSteel : Production Date (approx.) : March 2012. Genuine Parts here.
For something as simple as O Rings, the only difference between all 2 is the grub screw , so hold on to your own if you don’t know what version you have in case it is different.
Fuji Pull Out Nozzle
- Fuji Pull Out Nozzle – Version 1 Chrome/SilkSteel : Production Date (approx.) : Dec 2003 – March 2013. Genuine Part here.
- Fuji Pull Out Nozzle – Version 2 Chrome/SilkSteel : Production Date (approx.) : March 2013. Genuine Parts here.
If you look closely: the earlier version of the pull out Nozzle has a slight difference in the handle detail… see where the handle meets the body of the tap ? the two later versions have a groove cut out to enable the hand to be pulled down.
Last is the Franke Fuji U Spout, which has the distinctive U Shaped Spout
Chrome/SilkSteel : Production Date (approx.) : March 2018 – March 2020. Genuine Spare Parts here.