Archive for Franke Tap Spare Parts Guides
Posted by Alice on 01/11/2021
Valve and Vernier Insert Changing Procedure for the Franke Olympus Triflow Tap. The Triflow version has red , blue and green coloured indicators on the handles. Please note that this is a different tap to the Franke Olympus Filterflow. If you have the Franke Olympus Filterflow Tap, then you will have the letters C, H […]
Continue Reading →
Posted by Alice on 26/10/2021
This is a common issue and for the purposes of this blog post we are assuming that we have shipped your order correctly . Two lever tap (not a bridge tap) The hot valve for hot water feed (usually on the left) opens clockwise & the cold valve for the cold water feed (usually on […]
Continue Reading →
Posted by Alice on 26/08/2021
Franke Triflow Doric Spec sheet with part numbers. Connectors: 9.030617 – G ¼ m X ¼ Push fit connector – used to connect the green tube to the plastic housing 9.030618 – G ¼ m x 3/8 Push fit connector – used to connect the blue tube to the plastic housing Tubing: 9.280403 green tube […]
Continue Reading →
Posted by Alice on 23/02/2021
If your Kitchen Tap is dripping where the spout meets the base of the tap then usually a new set of O Rings should fix this problem. Troubleshooting : I have fitted O Ring Kit and tap is still leaking ? This could be due to how the O Ring Kit is fitted, so please check again. […]
Continue Reading →
Posted by Alice on 29/02/2020
Here below are examples of actual Valves in Taps to assist with Identification (or check) and some additional information to assist you in making the correct purchase. Remember, you can always return any unused parts or email us sales@tapsandsinksonline.co.uk for further advice / help. We are used to reviewing taps and parts and can quickly […]
Continue Reading →