Archive for Franke Tap Spare Parts Guides
Posted by Alice on 02/11/2017
To remove the standard screw in antisplasher (also known as Aerator or Perlator) from your Kitchen Tap : Take an adjustable spanner. Cover your antisplasher with a cloth so that you don’t mark or damage it. Turn anticlockwise to loosen. If as sometimes happens with an old / broken Aerator (Antisplash) that part of it […]
Continue Reading →
Posted by Alice on 16/10/2017
If your Franke Zurich Tap dripping from either (1) the spout (2) the handle or (3) where the spout meets the base. Please note that the Zurich ‘Filter Tap’ takes a different COLD Diverter Cartridge but otherwise, the same guide applies to the Filter Tap version of the Zurich as to the non-filter Version. The […]
Continue Reading →
Posted by Alice on 23/01/2017
Note: At the end of this blog are links to all the Genuine Franke Spare Parts referred to throughout the Blog for ease of reviewing / purchasing. Here are the 3 main causes as to why your Franke Mythos Tap dripping : 1. Franke Mythos Tap dripping from the Spout If your Franke Mythos Tap […]
Continue Reading →
Posted by Alice on 17/06/2016
If your Franke Triflow Kubus Tap is dripping from the Spout then you need to replace the valves. Your Franke Triflow Kubus Tap or Franke Filterflow Kubus Tap takes 3 valves (1 hot and 2 cold). The Triflow version was discontinued Spring 2011 and replaced by the Filterflow version. They have different parts. If your […]
Continue Reading →
Posted by Alice on 07/06/2016
1. Tap is dripping from the Spout If your Franke Planar Tap is dripping from the spout then it is most likely that you need to change the valves (one or both) and / or the brass bush ring (but usually its just the valve) hot or cold. There are two different versions of the […]
Continue Reading →