Archive for Franke Tap Spare Parts Guides
Posted by Alice on 19/05/2016
Replacing Franke Eiger O Ring Kit Question: I recently purchased an O Ring Kit from you for a Franke Eiger Tap. I have replaced the washers but I cannot get the grub screw to go back in. The split in the large washer I have positioned in line with the hole for the screw but […]
Continue Reading →
Posted by Alice on 24/11/2015
If your Franke Olympus Triflow or FilterFlow Tap is dripping from the Spout then you need to replace the valves. Your Olympus Triflow or FilterFlow tap takes 3 valves (1 hot and 2 cold). You need to know whether you have the ‘Triflow’ version or the ‘Filterflow’ version because these two taps take completely different […]
Continue Reading →
Posted by Alice on 07/11/2015
If your Franke Doric Tap is leaking from the Spout then you need to replace the valves. Your Doric Triflow or Filterflow tap takes 3 valves (1 hot and 2 cold). If your Franke Doric Tap is leaking from the Hot side then usually replacing the hot valve will solve this. See Tip below to […]
Continue Reading →
Posted by Alice on 03/11/2015
If your Corinthian Tap is dripping from the Spout then you need to replace the valves. Your Corinthian Triflow or Filterflow tap takes 3 valves (1 hot and 2 cold). If your Corinthian Tap is leaking from the Hot side then usually replacing the hot valve will solve this. It is a little bit trickier […]
Continue Reading →
Posted by Alice on 04/09/2015
If your Franke Tap leaking at base then you probably need to replace the O Rings. Different Franke Taps take different O Rings. If you go to our Franke Spare Parts Section here and select your Franke Tap (based on the pictures) and click on the link this will bring you to the O Ring […]
Continue Reading →