Abode Atlas Tap Bush for Valve 3868R

£10

Abode Atlas Tap Bush for Valve 3868R. Suitable for Atlas Tap Chrome – AT1053 and Brushed Nickel – AT1054

There is one bush per Valve so if you think you need one for each valve please order Two. If only replacing one valve, then you only need to order One Bush There is no difference between the Bush for the Cold Valve or the Bush for the Hot Valve.


See below for more images and information

Description

Abode Atlas Tap Bush for Valve 3868R

Measurements: 3868R Brass Bush
Outside Diameter: 29mm
Inside Diameter: 19mm
Viewed Height on Tap: 14mm
Overall Height: 20mm

The Brass Bush might be required if fitting new valve and the existing brass bush can not be separated from the old valve that is being replaced. If you can remove the existing valve without removing the brass bush then you might not require this spare part, or if the leak stops just by replacing the Valve, then you can return the Brass bush for a refund.

It can be a common enough problem that when you remove your Kitchen Tap Valve it looks different than the valve in the picture (or the Valve that you purchased from us). It is most likely because the brass bush is still attached.
Here is the Franke Olympus Valve

3561R Valve and Brass Bush 3868R separate

3561R Valve and Brass Bush 3868R separate

 

Here is the same Valve stuck inside the Brass Bush

3561R Valve surrounded by Brass Bush 3868R

3561R Valve surrounded by Brass Bush 3868R

 

If the Valve is stuck inside the Brass Bush then you will have to separate them OR buy a Brass Bush as well.

For tips on how to separate a Valve from a Brass Bush, see here.

 

All our Spare Parts are Genuine Spare Parts sourced directly from the manufacturer of your Product.

Please note that parts might be modified by the manufacturers over the years of a product being made as part of their continual improvements. We have put up the actual part number from the manufacturer so that you can check against your technical specifications sheets provided by the manufacturers when you originally purchased your product. If you no longer have your technical specification sheet we have also put up measurements or pictures, where appropriate, for you to check against your own spare part that you wish to replace. We can not always guarantee that a part will fit an older version of a product. All spare parts that do not fit can be returned for a refund but we do not refund associated postage costs.

Shipping Information

For shipping charges of £4.50, shipping will take approximately 3-4 working days following date of dispatch, Track and Trace (no signature required).
Full details of our Shipping / Returns policy can be found here.

 

Share on:
Share on FacebookTweet about this on TwitterPin on PinterestEmail this to someone

You may also like…

0

Your Cart