Description

Bristan Revolve Tap Valve

If your Tap is dripping from the Spout then you might need to change your Valves.  Here is our Guide 7 Easy Steps to replace Kitchen Tap Valve.

If your Tap is dripping where the Spout meets the Base you might need to replace your Bristan Revolve Tap O Ring Kit.

Earlier Bristan Revolve RV Monobloc mixer

• Valve Details: This Valve has two sets of threads: One Set ABOVE the Black O Ring and One Set BELOW.
  Nut Height: 8mm, Splines: 28, Overall height: 53mm, Diameter at thread: 21mm.
• We supply the original valve version of this white white seal underneath as that covers older taps as well.

Here is a link to all our Bristan Revolve Tap Spare Parts.

If your Valve looks wider than the Valve image here, then it is possible that the Bush inside the Tap has come out stuck to your Valve. While it should be the 3409R Bush, 30mm diameter, please check before ordering.  You may be able to remove it: check out this brass bush video

3561R valve inside 3408R Bush (36mm diameter) and 3561R Valve inside 3409R Bush (30mm diameter)

This is a Genuine Spare Part from the original Tap Manufacturer of your Tap.

• Genuine = Proper fit, tested by the Manufacturer
• Compatible = Not made by your Tap’s brand. May not fit or last.

We’ve seen compatible parts cause leaks or damage. Choosing genuine parts protects your tap and warranty.