Taps And Sinks Online

Carron Phoenix Dante Tap Brass Bush 3868R

£11 incl. VAT

In stock

There is one bush per Valve so if you think you need one for each valve please order Two. If only replacing one valve, then you only need to order One Bush There is no difference between the Bush for the Cold Valve or the Bush for the Hot Valve.

Description

Carron Phoenix Dante Tap Brass Bush 3868R

Measurements:

  • Outside Diameter: 29mm
  • Inside Diameter: 19mm
  • Viewed Height on Tap: 14mm
  • Overall Height: 20mm

The Brass Bush might be required if fitting new valve and the existing brass bush can not be separated from the old valve that is being replaced. If you can remove the existing valve without removing the brass bush then you might not require this spare part, or if the leak stops just by replacing the Valve, then you can return the Brass bush for a refund.

It can be a common enough problem that when you remove your Kitchen Tap Valve it looks different than the valve in the picture (or the Valve that you purchased from us). It is most likely because the brass bush is still attached.

If the Valve is stuck inside the Brass Bush then you will have to separate them OR buy a Brass Bush as well.

For tips on how to separate a Valve from a Brass Bush, see here.

Detailed Shipping / Returns information can be found here.
In Brief:
- Small items only by Post: £3.50 Can take currently up 7-10 working days.
- Courier Delivery DPD Track & Trace: £5.50 Usually takes c. 2-3 working days.
- BREXIT: No additional charges on delivery once your Order before shipping charges is less than £135.

You may also like…

0

Your Cart