Description
Franke Tap Valve SP3547
Measurements SP3547
- Overall height: 53mm
- Nut Height: 6mm
- Diameter at thread: 21mm
- Splines: 28
- Height of Splines: 11mm
A NEW Brass Bush might be required if you are replacing your Tap Valve and the Brass Bush Part has come away with your old valve i.e. your old valve is stuck inside (stuck to) the Brass Bush. If you cannot separate the Brass Bush from your old valve then you will need a new one.
It can be a common enough problem that when you remove your Kitchen Tap Valve it looks different than the valve in the picture (or the Valve that you purchased from us). It is most likely because the brass bush is still attached.

SP3547 Valve inside Brass Bush SP3886
Here is our guide Removing Brass Bush ring from Valve
Different Franke Taps use different Brass Bushes, so if you don’t know the Brass Bush you require, please contact us here and we will tell you.
BREXIT: No additional charges on delivery once your Order before shipping charges is less than £135.
Reviews
There are no reviews yet.