Description

Franke Tasso Filter Tap Valve

Here is our Guide 7 Easy Steps to replace Kitchen Tap Valve

Measurements: 

Nut Height: 8mm, Splines: 28, Overall height: 53mm, Diameter at thread: 21mm

You can buy the 3561R which comes with red or blue seals underneath. Early installation guides list the 1427R (aka 4276R) which comes with a white seal underneath. This white seal is slightly larger than the blue / red seal in later 3561R. We recommend always the white seal version, and especially so if your Tap is old.

Brass Bush

It can be common for your removed kitchen tap valve to look different from the one pictured or purchased. This is usually because the brass bush is still attached. If you can’t separate it from the old valve, you may need the 3868R Brass Bush.

If you remove the valve without the bush, you likely won’t need this part. And if the new valve stops the leak, you can return the unused bush for a refund.

See tips here on how to separate a Valve from a Brass Bush

If your Franke Tasso Filter Tap is dripping where the Spout meets the Base, then you might need to replace your O Ring Kit which can be found here.

This is a Genuine Spare Part from the original Tap Manufacturer of your Tap.

• Genuine = Proper fit, tested by the Manufacturer
• Compatible = Not made by your Tap’s brand. May not fit or last.

We’ve seen compatible parts cause leaks or damage. Choosing genuine parts protects your tap and warranty.