Description
Lamona Garda Tap3566 Pull-out Valve
Nut Height: 8, Splines: 28, Overall height: 53mm, Diameter at thread: 21mm
Due to modifications in this Tap by the manufacturer over the years, we supply the original white sealed version of this valve (larger seal underneath). We use code 4276R to distinguish from later valve used in the Tap which has a coloured flatter seal. This is a genuine Spare Part. Parts are labelled Hot & Cold. If opened and you cannot tell apart, as both Hot & Cold Valves have white seals underneath: the Hot valve opens Clockwise and has nicks on the side of the nut. The Cold Valve opens Anticlockwise and has no nicks.
It might be possible that your own Garda Pull Out Tap will have the later one threaded valve 3547R. We supply the ‘parent’ two threaded valve, 4276R as it then covers all the years of this product in manufacture. Here below is image of the two valves to show their visual differences. The fit is the exact same of either valve but the advantage of the 4276R over the 3547R is the white thicker seal underneath.
![SMR 3547R 4276R](https://www.tapsandsinksonline.co.uk/wp-content/uploads/2015/05/SMR-3547R-4276R-300x300.jpg)
SMR 3547R 4276R
Useful Tip
It can be a common enough problem that when you remove your Valve it looks different than the valve in the picture. It is most likely because the brass bush is still attached.
For tips on how to separate a Valve from a Brass Bush, see here.
If the Valve is stuck inside the Brass Bush then you will have to separate them OR buy a Brass Bush as well. See below for option to buy this product .
Reviews
There are no reviews yet.