Description

Lamona Victorian Tap4801 Valve & Bush Set

Lamona Victorian Tap4801 Valve Measurements:

• Overall height: 53mm
• Nut Height: 6mm
• Diameter at thread: 21mm
• Splines: 28
• Height of Splines: 11mm

Bush: 30mm Brass Bush

Please note: This 3547R Valve has been discontinued and the ‘new’ 3547R Valve has a flatter seal. The manufacturer of your tap has recommended replacing with the universal 4276RR Valve instead. It has an extra thread but other than that, has the correct number of splines, same height etc. and is fully compatible, comes from the same manufacturer, and has a larger seal (white).

The Hot Valve opens Clockwise. A Hot Valve has a nick on the side of the nut.

The Cold Valve opens Anti-Clockwise. A Cold Valve has NO nick on the side of the nut.

Tap4801 victorian valve and bush

See Guide here to identify which Lamona Victorian Tap you may have.

Howdens Victorian Tap4801 Valve FAQ

• Is this a Genuine Howdens Tap part ? Yes it is.
• How do I know which Valve to order? You need to determine where the drip is coming from e.g cold water feed or hot water feed. If in doubt, order a pair. There are more detailed tips / advice here.  This Blog post My Kitchen Tap is dripping should explain the most common causes (and parts required) to fix a dripping Kitchen Tap.
• My valve looks wider and completely different from the pictures here / the one I ordered ? Is the Bush stuck to your own Valve ? That is the round extra piece of Brass that surrounds the valve. Sometimes they can get stuck together and come out as one piece.  See the images below.  You can order the Bush part separately if needed. It is one Bush per Valve.
• How do I separate the Brass Bush from the Valve?  Check out this guide here.
• My tap is leaking at the base of the spout, not the top, what do I need? If your Tap is dripping where the Spout meets the Base then you might need to replace your O Ring Kit.

DIY Guides

• Here is our Guide: How to remove the Handle on your Kitchen Tap
• Here is our Guide: 7 easy steps to replace a valve
• Here is our Guide: How to replace your O Ring Kit
• Here is our General Troubleshooting Guide: UK Kitchen Taps Troubleshooting Guide
• Here is our Guide: How to Remove your Aerator / Antisplash from your Kitchen Tap
• Here is our Guide: What are the Splines on Tap Valve
• Here is our Guide: How to remove a Brass Bush from Valve

This is a Genuine Spare Part from the original Tap Manufacturer of your Tap.

• Genuine = Proper fit, tested by the Manufacturer
• Compatible = Not made by your Tap’s brand. May not fit or last.

We’ve seen compatible parts cause leaks or damage. Choosing genuine parts protects your tap and warranty.