Taps And Sinks Online

Abode Bellagio Tap Valve



Abode Bellagio Tap Valve Zoom ZP1003.  This is a genuine Spare Part. Here is our Guide 7 easy steps to replace kitchen tap valve.
If your Tap is dripping where the Spout meets the Base then you might need to replace your Bellagio O Ring Kit 1239R.

Please read further below before ordering.


Abode Bellagio Tap Valve

If you have the Zoom ZP1003 Model, then your Tap takes the 3505R Valve.

However, there was an earlier Bellagio Tap ACT2003, which took either the 1212R Valve (20 splines) or the 3505R Valve. We have put the details of both valves up here where you are not sure which version of the Bellagio Tap you have. We would recommend that unless you know for sure that you have the Zoom model, it is better to remove your own handle and count the splines. If you have 20 splines, order the 1212R. If you have 28 splines, order the 3505R. It is very easy to remove the handle. Here is our Guide How to remove the Handle on your Kitchen Tap. If you are not sure how to count the splines, then email pictures to us sales@tapsandsinksonline.co.uk and we will be happy to assist you.

Measurements 1212R

Overall height: 50mm
Nut Height: 8mm
Diameter at thread: 21mm
Splines: 20
Height of Splines: 8mm

1212R-C (cold Valve shown here).

1212R-C (cold Valve shown here)

Bellagio ACT2003 Tap

Bellagio ACT2003 Tap

Close up Handle Detail Earlier Bellagio Tap

Close up Handle Detail Earlier Bellagio Tap

Measurements 3505R

Overall height Brass to Brass: 47.4mm
Nut Height: 7mm
Diameter at thread: 22mm
Splines: 28
Height of Splines: 7.4m

SMR 3505R 28 Spline Valves HOT

SMR 3505R 28 Spline Valves Hot Valve shown here

San Marco Bellagio Tap

San Marco Bellagio Tap

Close up of Later Bellagio Tap

Close up of Later Bellagio Tap


This is a Genuine Spare Part.

Parts might be modified by the manufacturers as part of their continual improvements. We cannot always guarantee that a part will fit an older version of a product. All spare parts that do not fit can be returned for a refund excluding shipping costs.

Shipping Information : Please allow for Delays outside our control due to Covid-19 - (in Brief - see links below for more detailed information is our Normal Shipping Times if not delays).

Spares Parts: For Mainland UK / N.I and ROI, Minimum of £4.50 to maximum of £6.00 with DPD 2-3 working days. For UK Offshore Islands, please email us sales@tapsandsinksonline.co.uk, as there is an additional surcharge. Click here for more information about all Shipping here.

Please also note that these shipping times apply to Mainland UK, NI and ROI Only. Please refer to our Shipping / Returns section for other destinations.


Troubleshooting Guide

Troubleshooting Guide


There are no reviews yet.

Be the first to review “Abode Bellagio Tap Valve”

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

You may also like…


Your Cart