Carron Phoenix Aztec Tap Valve

£14£28

Clear

Carron Phoenix Aztec Tap Valve   1212R  or 3819R for the Cold Water side or Hot Water side of your Kitchen Tap.


Please note that this Tap has been changed several times over the years so it is very important, if you don't have your Installation Guide that came with the Tap (that would give you spare part numbers) that you check the measurements of your own parts against these parts listed below before buying.  All unused parts can be returned for a full refund within 28 days.
Please also read below before ordering.

Description

Carron Phoenix Aztec Tap Valve

1212R or 3819R

If your Tap is dripping from the Spout then you might need to change your Valves.  Here is our Guide 7 Easy Steps to replace Kitchen Tap Valve.
If your Tap is dripping where the Spout meets the Base you might need to replace your Carron Phoenix Aztec Tap O Ring Kit 1239R.
Here is the link to all our  Carron Phoenix Aztec Kitchen Tap Spare Parts.

 

Measurements 1212R

Overall height: 50mm

Nut Height:  8mm

Diameter at thread:  21mm

Splines: 20

Height of Splines:  8mm

1212R-C (cold Valve shown here).

1212R-C (cold Valve shown here. The Hot valve looks the same but has a nick in the nut).

Measurements 3819R

Overall height: 50mm

Nut Height:  8mm

Diameter at thread:  21mm

Splines: 20

Height of Splines:  6mm

Valve 3819R

Valve 3819R (shown here the Hot valve. Cold valve is the same without a 'nick' in the nut )

 

I don't know what Valve I need to fix my dripping Tap is a useful guide if you don't know what Valve you need to fix your Dripping Tap. There are other useful guides in our 'Helpful Tips' section such as the 'How to' section which includes DIY guides on changing valves, cartridges etc. These might be useful if you need to remove the handle (7 easy steps to replace a kitchen valve) or lever (How to replace a Cartridge on your single lever tap) on your tap in order to see what your own Tap Part looks like before you compare to ours. See our Tap Spare Parts Section for all the Spare Tap Parts on our Website.

 

 

If your valve looks like this in the image below, then the brass bush is still attached and you will need to separate and reuse with the new valve, or if you cannot separate, then buy a new brass bush as well.

1212R Valve with Brass Bush still attached

1212R Valve with Brass Bush 3408R 36mm still attached


For more about changing a valve and the brass bush (ring) coming away with your old valve, please read here..
If you do need to order a Brass Bush please check which one you have (or order both with a view to returning the one that you don’t need) as the original brass bush would be the 36mm 3408R and the later bush is the 30mm 3409R.

 

 

Parts might be modified by the manufacturers as part of their continual improvements. We cannot always guarantee that a part will fit an older version of a product. All spare parts that do not fit can be returned for a refund.

Shipping Information (in Brief - see links below for more detailed information).

Spares Parts: Minimum of £4.50 Royal Mail First Class 3-5 days to Maximum £6.00 Parcel Force Track & Trace , Signature Required, 2 - 3 days after dispatch day. Click here for more information about all Shipping here.

Share on:
Share on FacebookTweet about this on TwitterPin on PinterestEmail this to someone

Troubleshooting Guide

Troubleshooting Guide

Share on:
Share on FacebookTweet about this on TwitterPin on PinterestEmail this to someone

Reviews

There are no reviews yet.

Be the first to review “Carron Phoenix Aztec Tap Valve”

Your email address will not be published. Required fields are marked *

You may also like…

Reviews

There are no reviews yet.

Be the first to review “Carron Phoenix Aztec Tap Valve”

Your email address will not be published. Required fields are marked *

0

Your Cart