CDA TC77 Tap Valve

£15.40 – £30.80 incl. VAT

CDA TC77 Tap Valve

If your Tap is dripping from the Spout then you might need to change your Valves. Here is our Guide 7 Easy Steps to replace Kitchen Tap Valve.

If your Tap is dripping where the Spout meets the Base you might need to replace your O Ring Kit.

Measurements: Height 38mm Diameter at thread:20mm, Splines:28, Nut Height: 9mm

Description

CDA TC77 Tap Valve

Old SMR Mini Tap Valve 3794R (3308R) v New SMR Mini Tap Valve 3794R (3308R)

The CDA TC77 Tap Valve is a quarter turn Tap Valve (Hot or Cold). See below for more information on product codes and measurements.

The Hot and Cold Valve are not interchangeable as one opens clockwise and the other opens anti-clockwise.

This Valve can be difficult to remove. You may require a mechanics long socket and ratchet tool to remove the Valve from this Tap. We always recommend that if you do not have the correct tools or sufficient knowledge, it might be advisable to consult a plumber to prevent damage to your Tap.

Here is our Guide: Changing the SMR Mini Valve.

This post covers both types of mini valves that were (and are) used in the production of your Tap. and gives advice regarding tools to extract your valve. We currently stock both genuine San Marco / SMR valves .The Hot opens clockwise and the Cold opens anti-clockwise.

Do you need a special tool to remove your Valve ? : Check which Valve is in your own tap before removing in case you have the earlier 3308R version in your Tap. Its all covered, including pictures of both Valves, in our Guide here: Changing the SMR Mini Valve.which includes advice on how to remove either valve. No Brass Bush is required with this Tap Valve. Here below is the 4013R Removal Tool Product if you have the earlier 3308R (SP3308) and want to order it. The 4013R Tool does NOT fit the 3794R (SP3794) with the six sided nut.

Recently we have noticed that the new valve is a little stiffer to push the handle onto. We have reported this back to the manufacturer but they assure us that there have been no changes of any consequence and it is just to do with the tolerance on the machining of the valves. If this does occur just ensure that your own handle is clear inside of any residual debris and that you push the handle on and off the new valve a few times to loosen the splines slightly. You won’t damage your handle.

Tightening your valve: We would also recommend that you do NOT over-tighten this valve. As a rule of thumb, tighten as far as physically possible by hand, and then tighten 1/4 turn with an adjustable spanner.

Here is our Guide link again : Changing the SMR Mini Valve.

This is a Genuine Spare Part.

Detailed Shipping / Returns information can be found here.
In Brief:
- Small items only by Post: £3.50 Can take currently up 7-10 working days.
- Courier Delivery DPD Track & Trace: £5.50 Usually takes c. 2-3 working days.
- BREXIT: No additional charges on delivery once your Order before shipping charges is less than £135.