Description
Franke Kitchen Tap Valve SP3547
Measurements SP3547
- Overall height: 53mm
- Nut Height: 6mm
- Diameter at thread: 21mm
- Splines: 28
- Height of Splines: 11mm

SP3547R (shown here Hot Valve)
Important Information About the SP3547 Valve
This valve is compatible only with current Franke installation guides. Please note that an earlier version of the 3547R valve—commonly known as SMR 3547R—was previously used but has since been discontinued.
The current 3547R valve features a flatter seal underneath and is not compatible with taps using the older 3547R version, which has a larger seal. If your valve is stamped with a date code from 2013 or earlier (e.g., 06/13, 07/12, formatted like a bank card), it’s likely the earlier model.
In such cases, the tap manufacturer recommends using the universal 3561R valve (28 splines), which includes the larger base seal similar to the discontinued version. You can find a link to the 3561R valve below.
Note: If your installation guide specifies SP3547, then this is the correct valve.
Here is our Guide: 7 Easy Steps to replace Kitchen Tap Valve.

- Genuine = Proper fit, tested by the Manufacturer
- Compatible = Not made by your Tap’s brand. May not fit or last.
We’ve seen compatible parts cause leaks or damage. Choosing genuine parts protects your tap and warranty.
Detailed Shipping / Returns information can be found here.
In Brief:
- Small items only by Post: £3.50. Can take currently up to 7-10 working days.
- Courier Delivery DPD Track & Trace: £5.50. Usually takes c. 2-3 working days. Please make sure to provide mobile number for DPD to text you regarding your delivery.
- BREXIT: No additional charges on delivery once your Order before shipping charges is less than £135.
Reviews
There are no reviews yet.