Description

Lamona Bolsena Tap O Ring Kit

We have come across two different sizes for this Tap so we recommend measuring the base of your tap e.g the main body of your Tap  (not the plinth which the main body of the Tap sits on which would be wider, and is essentially a large thick ring) to check which you have.

If body of Tap measures 48-50mm diameter, Order the O Ring Kit 1231R

If body of Tap measures 40-41mm, Order the O Ring Kit 3959R

This is a Genuine Spare Part.

1231R

O Ring Kit 1231R

• We always recommend that you should check your own Spout before ordering a new set of O Rings.
• The reason for doing this is because if you have a pinhole in your spout (see example below of a pinhole) then replacing the O Ring Kit will not fix this.
• If you have a pinhole you will need to replace the entire Spout'
• Here is our Guide : How to remove Kitchen Tap Spout so that you can check for pinholes.
• If you think that you have a pinhole, and do not know what Spout you need, then contact us us with the details of your Tap e.g a picture, together with any other information that you know e.g the Brand might be marked on the Tap, so that we can send you a link to the correct Spout that you require.
• Here is the example of a pinhole in a Spout.
  

  Example Pinhole in Spout

Tip when changing the O Ring Kit :

• Usually only the black O Rings need to be replaced on your Spout unless one of the white O rings is broken.
• Some White O Rings have an intentional split in them as they might be used in some spouts that require a grub screw so an intentional split in the ring does not mean it is broken.
• Your new O Ring Kit might have surplus O Rings that may not be required for your particular Spout as some O Ring Kits had an additional smaller ring added in later years for stability.
• You can add Plumbers Grease to aid the movement or washing up liquid. Do not use anything like vaseline that will cause rubber to perish.

This is a Genuine Spare Part.