Description

Lamona Calaggio Matt Black Tap3650 Valve

This post covers both types of mini valves that were (and are) used in the production of your Tap and gives advice regarding tools to extract your valve. We currently stock both genuine San Marco / SMR valves. The Hot opens clockwise and the Cold opens anti-clockwise.

Do you need a special tool to remove your Valve ? Check which Valve is in your own tap before removing in case you have the earlier 3308R version in your Tap. It's all covered, including pictures of both Valves, in our Guide here: Changing the SMR Mini Valve, which includes advice on how to remove either valve. No Brass Bush is required with this Tap Valve.   Here below is the 4013R Removal Tool Product if you have the earlier 3308R (SP3308) and want to order it. The 4013R Tool does NOT fit the 3794R (SP3794) with the six sided nut.  

Recently we have noticed that the new valve is a little stiffer to push the handle onto. We have reported this back to the manufacturer but they assure us that there have been no changes of any consequence and it is just to do with the tolerance on the machining of the valves. If this does occur just ensure that your own handle is clear inside of any residual debris and that you push the handle on and off the new valve a few times to loosen the splines slightly. You won’t damage your handle.

Tightening your valve: We would also recommend that you do NOT over-tighten this valve. As a rule of thumb, tighten as far as physically possible by hand, and then tighten 1/4 turn with an adjustable spanner.

This is a Genuine Spare Part from the original Tap Manufacturer of your Tap.

• Genuine = Proper fit, tested by the Manufacturer
• Compatible = Not made by your Tap’s brand. May not fit or last.

We’ve seen compatible parts cause leaks or damage. Choosing genuine parts protects your tap and warranty.

Expert After-Sales Support

With over 30 years of experience, our Sales Team is here to help you troubleshoot any kitchen tap issue. The best way to keep your tap in top condition is to fix problems early — even a small drip can lead to bigger damage if left unresolved.

Plumbers often suggest replacing the tap, usually because the correct parts are hard to find or have been ordered incorrectly. But if you contact us before buying, we’ll help you choose the right part, so your plumber has everything needed to complete the repair.

DIY Guides

If you wish to fix the Tap yourself we provide DIY Guides on all our Howden Tap Spares to assist you.

• Here are our Video Plumbing Guides
• Here is our Guide: Why is my Tap Dripping
• Here is our Guide: How to fix a Dripping Tap
• Here is our Guide: How to remove the Handle on your Kitchen Tap
• Here is our Guide:  How to remove a Kitchen Tap Spout
• Here is our Guide: 7 easy steps to replace a valve
• Here is our Guide: How to replace your O Ring Kit
• Here is our Guide: How to replace a cartridge from a Single Lever Tap
• Here is our General Troubleshooting Guide: UK Kitchen Taps Troubleshooting Guide
• Here is our Guide: How to Remove your Aerator / Antisplash from your Kitchen Tap
• Here is our Guide: What are the Splines on Tap Valve
• Here is our Guide: How to remove a Brass Bush from Valve