Description

Maya Kitchen Tap Valve , also known as the 2552R valve, is one of the most popular valves and fits many UK Kitchen Taps.

Irrespective of which valve is in your tap (be it earlier 2552R or later 3547R), on the manufacturers advice, we will be supplying the two threaded valve with white seal underneath, 4276R.

Measurements 2552R (4276R)

Overall height: 53mm
Nut Height: 8mm
Diameter at thread: 21mm
Splines: 28
Height of Splines: 10mm

Spare Tap Parts 2552R – Cold Valve shown here

Measurements 3547R
Overall height: 53mm
Nut Height: 6mm
Diameter at thread: 21mm
Splines: 28
Height of Splines: 11mm

3547R Valve , Hot shown here.

4276R Valve in tap with Bush 3868R

SP3547 Valve in a Tap

Useful Tip

1. It can be a common enough problem that when you remove your  Valve it looks different than the valve in the picture. It is most likely because the brass bush is still attached.

Maya Valve 2552R with Brass Bush 3886R attached

If the Valve is stuck inside the Brass Bush then you will have to separate them OR buy a Brass Bush as well

2. Here is our DIY Video showing how to remove the Maya Tap Handle and Valve Cover.

3. Here is our Guide 7 Easy Steps to replace Kitchen Tap Valve.

4.  If your  Maya Tap is dripping where the Spout meets the Base you might need to replace your O Ring Kit. 

Here is the link to all our Maya Kitchen Tap Spare Parts.

This is a Genuine Spare Part from the original Tap Manufacturer of your Tap.

• Genuine = Proper fit, tested by the Manufacturer
• Compatible = Not made by your Tap’s brand. May not fit or last.

We’ve seen compatible parts cause leaks or damage. Choosing genuine parts protects your tap and warranty.