3886R Brass Bush with Lip

£10

In stock

3886R Brass Bush with Lip.  This part has been renamed SP3886 in current Franke Installation Guides.  It is the same part.

There is one bush per Valve so if you think you need one for each valve please order Two. If only replacing one valve, then you only need to order One Bush There is no difference between the Bush for the Cold Valve or the Bush for the Hot Valve.

This is the part that surrounds the Valve inside the Tap.  Sometimes when removing the old Valve, this brass bush also comes out i.e. the valve and brass bush appear as one.  They need to be separated to re-use the old brass bush with the new valve, or if neither can be separated, then you have to purchase a new brass bush as well as a new valve to fix your dripping tap.

See below for further information and images.

Description

3886R Brass Bush with Lip

Measurements: 3886R Brass Bush with Lip
Outside Diameter: 24mm
Outside Diameter at lip: 27mm
Viewed Height on Tap: 14mm
Overall Height: 19mm

 

A NEW Brass Bush might be required if you are replacing your Tap Valve and the Brass Bush Part has come away with your old valve i.e. your old valve is stuck inside (stuck to) the Brass Bush.  If you cannot separate the Brass Bush from your old valve then you will need a new one.

It can be a common enough problem that when you remove your Kitchen Tap Valve it looks different than the valve in the picture (or the Valve that you purchased from us). It is most likely because the brass bush is still attached.   The other most common Brass Bush that looks very similar is the  3868R Brass Bush with Recess which can be found here

 
Here is our guide Removing Brass Bush ring from Valve

Used SP3547 Valve inside Brass Bush SP3886

Old SP3547 Valve inside Brass Bush SP3886

Old Valve 1427R inside Brass Bush 3886

Old Valve 1427R inside Brass Bush 3886

 

All our Spare Parts are Genuine Spare Parts sourced directly from the manufacturer of your Product.

Please note that parts might be modified by the manufacturers over the years of a product being made as part of their continual improvements. We have put up the actual part number from the manufacturer so that you can check against your technical specifications sheets provided by the manufacturers when you originally purchased your product. If you no longer have your technical specification sheet we have also put up measurements or pictures, where appropriate, for you to check against your own spare part that you wish to replace. We can not always guarantee that a part will fit an older version of a product. All spare parts that do not fit can be returned for a refund but we do not refund associated postage costs.

Shipping Information

For shipping charges of £4.50, shipping will take approximately 3-4 working days following date of dispatch, Track and Trace (no signature required).
Full details of our Shipping / Returns policy can be found here.

 

 

Share on:
Share on FacebookTweet about this on TwitterPin on PinterestEmail this to someone

You may also like…

0

Your Cart