Which Carron Phoenix Replacement Plug to buy?

Essential Guide to buying Carron Phoenix Replacement Plug

Please read this guide below before purchasing any plug on our website as we have put all the information here.

The main issue is that often we do not know what waste kit (and therefore plug) was fitted with your sink.  It is not unheard of for a Kitchen Installer to use a different waste kit than the one that normally goes with a sink.

Why is this important ? because when fitting a sink the plug and cup (that the plug is fitted into) go together.  So if you have different plug i.e designed for a different cup, they won’t work.  All is not lost ! the worst case scenario if you find yourself in that position is that you will need to buy a new cup and plug (and then we would also recommend buying some spare plugs too at the same time).

Carron Phoenix Plug Variation 1

This Carron Phoenix Plug (Basket Strainer Plug) Variation 1 suits many models including the following Carron Phoenix models, Precision Plus Range, Precision XB Range, Contessa Range, Carisma 400,  Lavella ‘Inset’ Range (before Carron switched to the Revolution Waste)] Carisma Phoenix Zeta Undermount Range

Measurements V1:
Plug Diameter: 85mm Pin length: 37mm Pin Diameter: 8mm Overall Plug Height: 50mm. Diameter of black rubber disc is 52mm wide.

V1 Upper new

Carron Phoenix Plug V1

V1 new

V1 new

V1 Plug Close up of Slats (Holes). Slats Taper into the centre of the Plug unlike slats in V2

Carron Phoenix Plug Variation 2

This Carron Phoenix Plug V2 suits many models including the following  Summit, Coral,  Belfast 100 /200,  Shonelle,  ZX,  Zeta Inset

Measurements V2:
Plug Diameter: 80mm Pin length: 30mm Overall Plug Height: 52mm
Pin Diameter: 8mm
Rubber Seal: 56mm

Colour: Available in Chrome only.

V2 Plug Slats detail

V2 Plug. The Slats (Holes) do NOT taper towards the centre of the Plug.

Carron Phoenix Sink Plug Variation 1 (underneath)

Carron Phoenix Sink Plug Variation 2 (underneath)

Carron Phoenix Plug Variation 3 with 6 Black Rubber Prongs
This was used in many of the Older Carron Phoenix Models and is very distinctive in appearance.

Measurements V3
Plug Diameter: 80mm Overall Plug Height: 32mm Underside Diameter of prongs: 48mm Rubber Seal:  48mm

Carron Phoenix Sink Plug V3 Side

Carron Phoenix Sink Plug V3 Side

Carron Phoenix Plug V3 Details

Carron Phoenix Plug V3 Details

Carron Phoenix Revolution Pop-up Plug (variation 4)

Carron Phoenix Pop-Up Plug V4
Carron Phoenix Revolution Plug (side image) V4

Carron Phoenix Revolution Plug (side image) V4

Carron Phoenix Revolution Plug (side image) V4

Carron Phoenix Revolution Plug V4

Carron Phoenix Revolution Pop-up Plug V4

This Carron Phoenix Revolution Pop Up Plug (variation 4) suits many models including the following ZX, Samoa, Fiji, Silhouette, Ergo, Vela, Deca, Tetra, Adelphi, Sapphira, Carlow, Java, Bali, Aria, Isis Maui, Cuba, Lavella

PLEASE NOTE THAT YOU CANNOT CHANGE YOUR VARIATION 4 POP UP PLUG FOR ANOTHER PLUG UNLESS YOU ALSO CHANGE THE CUP THAT THE PLUG GOES INTO E.G. VARIATION 2 CUP AND PLUG SET

Carron Phoenix has only one Pop Up Plug available – this one, V4.  The diameter of the Stainless Steel Disc on Top is 73mm. Diameter of plug is 80mm. Pin Length is 47mm. Overall height when opned is 87mm. If your existing plug pops up and you have a Carron Phoenix Sink and it looks like V4 in the picture, then this is the plug you need to purchase as a replacement unless you also change the Cup underneath as well.

**Please note that it is not recommended that you take apart this Plug for cleaning as this will void your warranty**
Here is our Guide Carron Phoenix Revolution Pop Up Plug Maintenance

Carron Phoenix Plug Basket Strainer (variation 5) :

This Carron Phoenix Plug Variation 5  was used in earlier models such as the Select, Carisma, Balmoral, Lavella (early range).

 

Measurements V5
Plug Diameter: 85mm Pin length: 37mm Overall Plug Height: 48mm

V5 has been discontinued but V1 Will also fit so if you order V5 you will receive V1.

Carron Phoenix Sink Plug V5 Under

Carron Phoenix Sink Plug V5 Under

Carron Phoenix Sink Plug V5

Carron Phoenix Sink Plug V5 Side

Belfast 110 Plug
If you have a Belfast 110 Sink (that comes with weir overflow and small sink hole outlet) then this currently only comes as part of the Belfast 110 Waste and Plumbing Kit which you can find here.

Disclaimer: We have no way of knowing whether or not the waste and plumbing kit used was the original waste and plumbing kit supplied by Carron Phoenix. That is why it is so important to check the measurements that are supplied with each plug and also compare pictures. While we offer full refunds, we will not offer a refund for the postage cost of returning a plug should it not fit.

Detailed Shipping / Returns information can be found here.
In Brief:
- Small items only by Post: £3.50 Can take currently up 7-10 working days.
- Courier Delivery DPD Track & Trace: £5.50 Usually takes c. 2-3 working days.
- BREXIT: No additional charges on delivery once your Order before shipping charges is less than £135.

 

Posted in: Carron Sinks Parts Guides, Plumbing Guides

Leave a Comment (0) ↓

Leave a Comment