Description
Franke FilterFlow Olympus Tap Valve
Due to modifications in this Tap by the manufacturer over the years, we supply the original white sealed version of this valve (larger seal underneath). We use code 4276R to distinguish from later valve used in the Tap which has a coloured flatter seal. This is a genuine Spare Part. Parts are labelled Hot & Cold. If opened and you cannot tell apart, as both Hot & Cold Valves have white seals underneath: the Hot valve opens Clockwise and has nicks on the side of the nut. The Cold Valve opens Anticlockwise and has no nicks.
Fun Part Number
1472R-H 133.0069.365
1427R-C 133.0069.364
Valve Details: This Valve has two sets of threads: One Set ABOVE the Black O Ring and One Set BELOW.
Nut Height: 8, Splines: 28, Overall height: 53mm, Diameter at thread: 21mm.

1427R Valve in Tap with Handle Removed. Wide Part is Bush surrounding Valve that may or may not come out stuck to the valve.

Franke Olympus Valve 1427R Blueprint
It can be a common enough problem that when you remove your Olympus Valve it looks different than the valve in the picture. It is most likely because the brass bush is still attached.
Here is the Franke Olympus Valve

Franke Olympus Valve and Brass Bush (not attached)
Here is the same Valve stuck inside the Brass Bush

Franke Olympus Valve with Brass Bush attached
If the Valve is stuck inside the Brass Bush then you will have to separate them OR buy a Brass Bush as well.
BREXIT: No additional charges on delivery once your Order before shipping charges is less than £135.
Reviews
There are no reviews yet.