Description

Franke Kubus Kitchen Tap Valve

If you wish to replace the Cold Water Feed Valve, please order  3062R-H CO i.e. a Clockwise Opening
If you wish to replace the Hot Water Feed Valve, please order  3062R-C ACO i.e. an Anti-Clockwise Opening Valve.

Measurements: Nut Height: 6, Splines: 20, Overall height: 48mm, Diameter at thread: 16mm
Usually in a standard monobloc Two Lever style Tap a Hot Valve means a Clockwise Opening Valve and a Cold Valve means an Anti-Clockwise Opening Valve. However there are some Taps that work in the opposite way to a standard two lever tap and these are Taps like Bridge Taps with Levers or the Kubus here. Accordingly:

If you wish to replace the Cold Water Feed Valve, please order  3062R-H CO i.e. a Clockwise Opening
If you wish to replace the Hot Water Feed Valve, please order  3062R-C ACO i.e. an Anti-Clockwise Opening Valve.

Hot 3062R : 133.0069.377 (to be fitted in the Cold Water Feed as you need an Anti Clockwise opening valve due to the way the Levers on this Tap open / close)
Cold 3062R : 133.0069.376 (to be fitted in the Hot Water Feed as you need a Clockwise opening valve due to the way the Levers on this Tap open / close)

If your Tap is dripping from the Spout then you might need to change your Valves.  Here is our Guide 7 Easy Steps to replace Kitchen Tap Valve.  If your Tap is dripping where the Spout meets the Base you might need to replace your Franke Kubus Kitchen Tap O Ring Kit 22868r.

Here is a link to all our Franke Kubus Tap Parts.

This is a Genuine Spare Part.