Description

Franke Verno Tap Valve

Measurements 3794R:

• Height: 38mm
• Diameter at thread: 20mm
• Splines: 28
• Nut Height: 5mm
• The Hot Valve opens Clockwise. The Cold Valve opens Anti-clockwise.

This post covers both types of mini valves that were (and are) used in the production of your Tap and gives advice regarding tools to extract your valve. We currently stock both genuine San Marco / SMR valves. The Hot opens clockwise and the Cold opens anti-clockwise.

Do you need a special tool to remove your Valve ? Check which Valve is in your own tap before removing in case you have the earlier 3308R version in your Tap. It's all covered, including pictures of both Valves, in our Guide here: Changing the SMR Mini Valve, which includes advice on how to remove either valve. No Brass Bush is required with this Tap Valve.   Here below is the 4013R Removal Tool Product if you have the earlier 3308R (SP3308) and want to order it. The 4013R Tool does NOT fit the 3794R (SP3794) with the six sided nut.  

Recently we have noticed that the new valve is a little stiffer to push the handle onto. We have reported this back to the manufacturer but they assure us that there have been no changes of any consequence and it is just to do with the tolerance on the machining of the valves. If this does occur just ensure that your own handle is clear inside of any residual debris and that you push the handle on and off the new valve a few times to loosen the splines slightly. You won’t damage your handle.

Tightening your valve: We would also recommend that you do NOT over-tighten this valve. As a rule of thumb, tighten as far as physically possible by hand, and then tighten 1/4 turn with an adjustable spanner.

This is a Genuine Spare Part from the original Tap Manufacturer of your Tap.

• Genuine = Proper fit, tested by the Manufacturer
• Compatible = Not made by your Tap’s brand. May not fit or last.

We’ve seen compatible parts cause leaks or damage. Choosing genuine parts protects your tap and warranty.

Genuine Franke Verno Tap Spares available here

We also advise on what part is needed to save you time & money, even for older models. By fixing your Franke Tap with Genuine Franke Verno Tap Spares you prolong the life of your Franke quality product.

All the Parts you need available here

We sell from the smallest Grub screw, to Valves, Cartridges, O Ring Kits, Spouts & Handles. When you purchase Genuine Franke Tap Spares from us you can email us after you have bought it for further advice. Troubleshooting guides and DIY guides to fit all the Franke Tap Spares are linked to the parts online. We also have a Help Section here for the most common queries.

DIY Guides

• Here are our Video Plumbing Guides
• Here is our Guide: Why is my Tap Dripping
• Here is our Guide: How to fix a Dripping Tap
• Here is our Guide: How to remove the Handle on your Kitchen Tap
• Here is our Guide: 7 easy steps to replace a valve
• Here is our Guide: What are the Splines on Tap Valve
• Here is our Guide: How to remove a Brass Bush from Valve

After Sales Service

Our Sales Team offers excellent after-sales support. With over 30 years of experience, we can troubleshoot any kitchen tap issue. It’s best to address problems like drips right away, as ignoring them can damage the tap. While some plumbers may suggest replacing the tap, we can help you find the right part to fix it

If you contact us before buying, we will advise you on the correct part for your Tap. This way, if you need to call a plumber, all the correct parts will be ready for them to fix your tap.

If you wish to fix the Tap yourself we provide DIY Guides on all our Franke Tap Spares to assist you.