Description
Lamona Rhone Tap Valve
53mm tall, with 28 Splines.
Here is our Guide: How to remove the Handle on your Kitchen Tap.Where you are unsure as to the model of your own tap, we would advise that you remove your own handle and check which you have before ordering as its not hard to do per our guide above.
If your Tap has 20 splines and has two threads (looks like 3984R ) then please take a look at this Valve here.
If your Tap has 20 splines and has one set of threads (looks like the 3819R ) then please take a look at this Valve here.
If your Tap Valve looks like the 3547R here below:
If you have the Lamona Rhone Tap which has a 28 spline valve:
Please note that the original 3547R Valve has been discontinued and the replacement 3547R has a flatter seal (from 2015 onwards).
Where your Valve is stamped 2014 or earlier: Please select the Valve 4276R, which is a two threaded Valve and while it might look different than your own one threaded valve, it is the Valve that you need because it has a larger white seal underneath and will work the same as the discontinued valve that is in your Tap.
Where your Valve is stamped 2015 or later: You can select either the 4276R with two threads (which comes with the larger white seal) OR the 3547R one threaded valve which is the same valve that is in your Tap.
Please note that rarely, a customer, when fitting the 4276R valve with white seal underneath, reports a slight gap between handle and body of the tap. This is due to the larger white seal. This seal will flatten with use. If you wish to buy the 3547R and your tap continues to drip, we will not replace under 1 year warranty if your Tap is 2014 or older. Please retain your old valve as proof of age of your own Tap. The valve will have a date stamped on it.
Here is our Guide 7 Easy Steps to replace Kitchen Tap Valve.
Measurements 4276R
Overall height: 53mm
Nut Height: 8mm
Diameter at thread: 21mm
Splines: 28
Height of Splines: 10mm
Measurements 3547R
Overall height: 53mm
Nut Height: 6mm
Diameter at thread: 21mm
Splines: 28
Height of Splines: 11mm
This is a Genuine Spare Part.
Detailed Shipping / Returns information can be found here.
In Brief:
- Small items only by Post: £3.50 Can take currently up 7-10 working days.
- Courier Delivery DPD Track & Trace: £5.50 Usually takes c. 2-3 working days.
- BREXIT: No additional charges on delivery once your Order before shipping charges is less than £135.
Reviews
There are no reviews yet.