Archive for How to identify which Valve you need
Posted by Alice on 20/10/2016
Spare Parts for Perlator Tap We get frequent queries regarding fixing a Perlator Tap but ‘Perlator’ is just the brand name of the Aerator at the tip of the Spout. It is not the actual name of the Tap Brand or the Tap. Fortunately we stock most of the UK Leading Tap Brand Spare Parts and […]
Continue Reading →
Posted by Alice on 23/07/2016
Neoperl is just the brand name of the Aerator at the tip of the Spout. It is not the actual name of the Tap Brand or the Tap. Fortunately we stock most of the UK & Ireland Leading Tap Brand Spare Parts and once we have the correct information as outlined in the blog link below then […]
Continue Reading →
Posted by Alice on 23/07/2016
Usually your Kitchen Tap is dripping from either (1) the spout, (2) less common is the handle and (3) where the spout meets the base. If it is dripping from the Spout or Handle then if your Tap has two or three levers it is most likely that you need to change the valves (one, […]
Continue Reading →
Posted by Alice on 17/06/2016
If your Franke Triflow Kubus Tap is dripping from the Spout then you need to replace the valves. Your Franke Triflow Kubus Tap or Franke Filterflow Kubus Tap takes 3 valves (1 hot and 2 cold). The Triflow version was discontinued Spring 2011 and replaced by the Filterflow version. They have different parts. If your […]
Continue Reading →
Posted by Alice on 26/11/2015
Usually if your tap is dripping from the spout then you need to Change the valve: Hot or Cold (or both) – if you have a Two Lever Tap or Cartridge ( if you have a Single lever tap) A triflow tap has 3 valves , one for the hot side, one for the mains cold […]
Continue Reading →