Archive for Plumbing Guides
Posted by Alice on 01/02/2015
Note: At the end of this blog are links to all the Spare Parts referred to throughout the Blog for ease of reviewing / purchasing. 3 main causes as to why your Franke Olympus Tap dripping : 1. Franke Olympus Tap dripping from the Spout: Most likely you need to change the valves (one or […]
Continue Reading →
Posted by Alice on 31/01/2015
Usually your Kitchen Tap is dripping from either (1) the spout or (2) where the spout meets the base. If it is dripping from the Spout then it is most likely that you need to change the valves (one or both) and / or the brass bush ring (but usually its just the valve) hot […]
Continue Reading →
Posted by Alice on 31/01/2015
The Franke Davos Tap has been in production since 1997. If you have a Franke Davos mixer tap which is dripping then you need to identify which Franke Davos Mixer Tap you have to ensure that you order the correct parts to repair your Tap. How to recognise / identify which Davos Model you have. […]
Continue Reading →
Posted by Alice on 13/11/2014
What does a Reversible Sink mean? It means that there is a tap hole on both sides of the sink so that you can pick which side you want the drainer on, and included in the fittings is a round disc (known as a ‘blank’ with the Carron Phoenix Logo on it) that covers the […]
Continue Reading →
Posted by Alice on 02/09/2014
Question: Hi, is there any tips on Removing Kitchen Tap Valve Bush from Valve? I have tried wwd40 but seems solid. Answer: The Valve Bush (Brass Ring) is a separate part that surrounds the Valve & is a part used in some (but not every) Tap. Over time grit or debris like Limescale can cause […]
Continue Reading →
Page 6 of 9 «...45678...»