Description

Howdens Lamona Professional Tap9157 Valve

If your Howdens Lamona Professional Tap9157 Valve is dripping continuously then you might need to change your Valves.

If it is only dripping intermittently then it is possible that debris is stuck behind the Aerator at the tip of the spout.

If your Tap is dripping where the Spout meets the Base you might need to replace your O Ring Kit.

Ideally you should remove your own valve before ordering a replacement valve to ensure that you order the correct one and that way you would also know if you require the brass bush or not.

Valve Measurements

• Nut Height: 8mm
• Splines: 28
• Overall height: 53mm
• Diameter at thread: 21mm

Before ordering your replacement Tap9157 Valve, you might require the Bush for Valve as well. This is a brass cylindrical piece that the valve sits into inside the Tap. Sometimes these parts stick together and when the Valve is removed, the Bush comes out as well. Should you also require a Brass Bush (one per valve), the same part number SP3868 is used on both Hot and Cold Valve.

1427R (3561R) Valve surrounded by Brass Bush 3868R

Howdens Lamona Professional Tap9157 Valve FAQ

• Is this a Genuine Howdens Tap part ? Yes it is.
• How do I access the Valve? You need a 2mm allen key to loosen the grub screw underneath the handle. See below for our DIY Guides.
• How do I know which Valve to order? You need to determine where the drip is coming from e.g cold water feed or hot water feed. If in doubt, order a pair. There are more detailed tips / advice here.  This Blog post My Kitchen Tap is dripping should explain the most common causes (and parts required) to fix a dripping Kitchen Tap.
• My Valve has a different coloured seal than the one you have sent me?  Due to modifications over the many years that this Tap has been in production, we supply the universal Lamona Valve that covers all these changes.  This is based on the manufacturer’s recommendations.
• My valve looks wider and completely different from the pictures here / the one I ordered ? Is the Bush stuck to your own Valve ? That is the round extra piece of Brass that surrounds the valve. Sometimes they can get stuck together and come out as one piece.  See the images below.  You can order the Bush part separately if needed. It is one Bush per Valve.
• How do I separate the Brass Bush from the Valve?  Check out this guide here.
• My tap is leaking at the base of the spout, not the top, what do I need? If your Tap is dripping where the Spout meets the Base then you might need to replace your O Ring Kit.

DIY Guides

• Here is our Guide: How to remove the Handle on your Kitchen Tap
• Here is our Guide: 7 easy steps to replace a valve
• Here is our Guide: How to replace your O Ring Kit
• Here is our General Troubleshooting Guide: UK Kitchen Taps Troubleshooting Guide
• Here is our Guide: How to Remove your Aerator / Antisplash from your Kitchen Tap
• Here is our Guide: What are the Splines on Tap Valve
• Here is our Guide: How to remove a Brass Bush from Valve

This is a Genuine Spare Part from the original Tap Manufacturer of your Tap.

• Genuine = Proper fit, tested by the Manufacturer
• Compatible = Not made by your Tap’s brand. May not fit or last.

We’ve seen compatible parts cause leaks or damage. Choosing genuine parts protects your tap and warranty.