Archive for Plumbing Guides
This is a common issue and for the purposes of this blog post we are assuming that we have shipped your order correctly . Two lever tap (not a bridge tap) The hot valve for hot water feed (usually on the left) opens clockwise & the cold valve for the cold water feed (usually on […]
Continue Reading →Franke Triflow Doric Spec sheet with part numbers. Connectors: 9.030617 – G ¼ m X ¼ Push fit connector – used to connect the green tube to the plastic housing 9.030618 – G ¼ m x 3/8 Push fit connector – used to connect the blue tube to the plastic housing Tubing: 9.280403 green tube […]
Continue Reading →If your Kitchen Tap is dripping where the spout meets the base of the tap then usually a new set of O Rings should fix this problem. Troubleshooting : I have fitted O Ring Kit and tap is still leaking ? This could be due to how the O Ring Kit is fitted, so please check again. […]
Continue Reading →Here below are examples of actual Valves in Taps to assist with Identification (or check) and some additional information to assist you in making the correct purchase. Remember, you can always return any unused parts or email us sales@tapsandsinksonline.co.uk for further advice / help. We are used to reviewing taps and parts and can quickly […]
Continue Reading →Posted in: Abode Kitchen Taps Spare Parts Guide, Carron Taps Spares Guides, Franke Tap Spare Parts Guides, Helpful Tips, How to identify which Valve you need, How to...., Howdens Lamona Kitchen Taps Spare Parts Guides, Perrin and Rowe Tap Spare Parts Guides, Plumbing Guides, Rangemaster Leisure Spare Parts Guides
Leave a Comment (0) →O Ring Kit Seal kit Changing Procedure for the Perrin and Rowe Mixer Tap. It should be an easy matter to change the O Ring Kit (seal kit) in your tap if you follow these simple instructions. To remove the Spout: 1) Turn off the water supplies to the mixer tap. Place plug in to […]
Continue Reading →